0
What else can I help you with?
If generator is 635 KVA what is alternator KVA rating?
635kva
How can you convert the kva rating into kw rating?
kva*cos(phase angle)
What is the KVA rating required of the testing transformer?
Depends on the kva rating of the devices to be tested using a transformer.
What is the kva rating of a transformer that has a secondary winding that's delivering 10 amps at 480 vac?
To calculate the kVA rating of the transformer, you can use the formula: kVA = (Voltage × Current) / 1000. In this case, the secondary winding delivers 10 amps at 480 volts. Therefore, the kVA rating is (480 V × 10 A) / 1000 = 4.8 kVA.
Do the load carried by a transformer is affected by KVA rating?
yah! definately affects, the kva of transformer is suitable for the certain load according to the rating.
Transformer rating is expressed in?
VA or KVA or MVA
Why you are indicating capacity of transformer in KVA?
transformer action doesn't depend on power factor that is why we indicate its rating in KVA
How many 200 amp panels can you tap off 250 kva transformer?
You can tap off approximately 833 200 amp panels from a 250 kVA transformer. This calculation is based on dividing the kVA rating of the transformer by the current rating of the panel.
What is the rating in KVA for a desktop computer?
If a device doesn't give its power rating in kVA (or VA), then it can be calculated pretty easily: (volt-amperes) VA = V (voltage) x A (maximum amperage) (kilovolt-amperes) kVA = VA (volt-amperes) / 1000
How can you calculate the rating of generator to connect with ATS 3Ph 600A 600V?
Sir, The rating of ac generator is always calculated in KVA.So rating of generator as asked in your question is 360 KVA Sir, The rating of ac generator is always calculated in KVA.So rating of generator as asked in your question is 360 KVA
Is the kva rating of a three phase generator per phase or a total of the three phases example is a 3 phase 75 kva generator 25 kva per phase or 75 per phase?
The kV.A (not 'kva') rating is the total apparent power of the machine. So a 75 kV.A machine is 25 kV.A per phase.
When the voltage is increased or decreased what effect does it have on the KVA rating?
Usually increase will cause the KVA levels to come up, especially when you have a decent amperage...
