switch on the transmission which sends a signal to the reverse lights when shift is in reverse......... is shot. You need a mechanic.
If the reverse lights are not working on a 1999 Chevy Suburban, be sure to check the fuse panel. If all the fuses are in working order, check the wires for any loose connections. Faulty wires can result in little or no light input.
if you changed the bulbs and still nothing.. its the reverse switch that's on the tranny. about a 10$ fix and 5 min to replace. good luck!
i have a 1990 Chevy van cargo left hand turn blinker not working (rear) all other lights work change out bulb still not working
the reverse light switch is either out of adjustment. or broken. new one should be fairly cheap
on what vehicle ? ford Chevy crosley fiat yogo ? there could be more than one switch usually the reverse light switch is located on the trans
It is possible for the brakes to lock up on a 2000 Chevy Venture when in reverse because the brakes are not working properly. Perhaps the brake pads need to be changed.
my 98 suburban did the same thing. when i changed my headlight switch that turns them off and on, they started working again.
My dashpanel lights stopped working in your Chevy Monte Carlo ss 2001 what could the problem be
In my case, when turning the lights on, the daytime lights turn off, but the taillamps still on. I found that the steering wheel combo switch (turning lights/windshield switch) connector (the clear color one, was excesive hot and the plastic melt. I changed the connector by a junkyard one and it worked. I guess if you don't have one handy, you'll need to fix your old one.
had that prblem, its your wireing hornis
the connection between the battery and the brake lights
Check fuses.