They are too hot when they make them
Yes. They are the usual three square pin plugs and sockets as in the UK.
PROPER SOCKETS, AND DRIVES PLUS EXTENSIONS AND SWIVELS FOR THE REAR PLUGS. MAKE SURE YOU USE DEEP WELL SOCKETS, IT'S EASY TO CRACK THE INSULATORS ON THE PLUGS IF YOU DON'T
in the sockets muppit
Si
To prevent plugs from falling out of sockets, you can use plug retention clips, outlet covers with built-in locking mechanisms, or simply ensure that the plug is securely inserted into the socket.
you must take the top module off the engine and then remove the rubber plugs that are on top of the spark plug, then use the spark plug sockets to get them out you must take the top module off the engine and then remove the rubber plugs that are on top of the spark plug, then use the spark plug sockets to get them out you must take the top module off the engine and then remove the rubber plugs that are on top of the spark plug, then use the spark plug sockets to get them out
head gasket!
Toggle bolts and anchor screws are suitable wall plugs for hanging heavy objects on drywall.
Try here: http://www.mouser.com They have them in small or large lots. XD
A domestic installer is an electricain who specialises in house appliances. Like lights,plugs,sockets,fans that sort of thing
You need an adapter to plug your plug into, which will then plug into the sockets in Europe. Be aware that the sockets in Britain and Ireland are different to the sockets in much of the rest of Europe, so you need to know where you are going. All airports sell the adapters, as do many large shops, so you can get advice on which to buy there.
Hong Kong uses the same British Standard BS 1363 used in the UK. In the past prior to the Electrical Products (Safety) Regulation many types of plugs could be found in Hong Kong. Nowadays, virtually all plugs fitted in equipment sold in Hong Kong are BS 1363 compatible.