because they are new they haven't bin smoothed out with water there just rubber so there is quite a bit of friction.
Your bike's disc brakes may be rubbing on one side due to misalignment of the brake caliper or a warped rotor. This can cause uneven pressure on the brake pads, leading to rubbing. Adjusting the caliper position or replacing the rotor may help resolve the issue.
To fix rubbing bike brakes, first check if the brake pads are aligned properly with the wheel rims. Adjust the position of the brake pads if needed. Next, make sure the wheel is centered in the frame and not rubbing against the brake pads. If the issue persists, consider cleaning or replacing the brake pads.
To adjust your bike brakes and stop them from rubbing, first check if the wheel is properly centered in the frame. Then, loosen the brake caliper mounting bolts slightly and realign the caliper so it is centered over the wheel. Tighten the bolts back up and test the brakes to ensure they are no longer rubbing.
To adjust your bike's disc brakes and stop them from rubbing, you can try loosening the brake caliper bolts slightly, then squeezing the brake lever to center the caliper over the rotor. Next, tighten the bolts back up and spin the wheel to check for any rubbing. Repeat the process if needed until the brakes are properly aligned and no longer rubbing.
To fix the back bike brakes, first check for any visible issues such as worn brake pads or loose cables. Adjust the brake pads to ensure they are aligned with the rim and not rubbing against the tire. Tighten any loose cables and adjust the tension as needed. If the brakes still do not work properly, consider replacing the brake pads or taking the bike to a professional for further inspection.
Tektro hydraulic disc brakes may be rubbing due to misalignment of the brake calipers, uneven brake pad wear, or air in the brake lines. Adjusting the calipers, replacing worn brake pads, or bleeding the brake lines can help resolve the issue.
Your disc brakes may be rubbing due to misalignment or contamination. To fix this issue, you can try adjusting the caliper alignment, cleaning the rotor and pads, or replacing worn components. If the problem persists, it may be best to consult a professional bike mechanic for further assistance.
To adjust your bike brakes and stop them from rubbing on one side, first, loosen the brake caliper mounting bolt. Then, center the brake pads by squeezing the brake lever and tightening the bolt back up. Finally, check the alignment and adjust as needed until the brakes are centered and no longer rubbing.
I don't know the Renault Clio but as a general rule I would examine the brakes first to see if the linings are rubbing when the wheel is rotated backwards. (This applies to disc or drum brakes.)
rubbing from brakes or rubbing from frame
To fix bike brakes that are rubbing, first check if the wheel is properly centered in the frame. If it is, adjust the brake calipers to ensure they are aligned with the wheel rim. You may also need to adjust the tension of the brake cable. If the issue persists, consider replacing worn brake pads or cleaning the braking surface of the wheel.
To fix squeaky mountain bike brakes, try cleaning the brake pads and rims with rubbing alcohol or sandpaper to remove any debris or glazing. Adjust the brake pads to ensure they are properly aligned and not rubbing against the rims. If the squeaking persists, consider replacing the brake pads with new ones.