there are 3 possible causes that a sparkplug will blow out of its hole. Most likely the plug was over tightened stripping the threads. A loose plug can also hammer the threads out of the hole over time as well. Or the plug wasnt tightened and worked its way out but this is unlikely because the plug wire boot will usually prevent the plug turning.
Could be that the threads are stripped on the plug or the head where the plug is screwed in. Or maybe it's the wrong plug..
There are no plug wires. The Intrepid has a coil on plug system.
With a Spark plug gap tool :)
The spark plug gap for a 2000 Dodge Intrepid measures .050 inches. This is the equivalent of 1.2 to 1.3 mm.
1999 Dodge Intrepid 2.7L SFI DOHC 6cylThe Spark Plug Gap.054 (In thousandths of an inch)
The plug gap for the 97 intrepid 3.5 is .035.
When changing out the spark plugs of a car, maintaining the gap is important to help the car run correctly. For a 1993 Dodge Intrepid the spark plug gap is 0.04 millimeters.
.050 inches
.040
First you need a Torx head screwdriver(the proper size of course) to remove the two torx screws that secures the wiring head that leads to the spark plug. Then you would use the proper size spark plug socket (has a rubber washer inside), I believe its 5/8, to remove the spark plug it self. (You have to pull up on the wiring head in order to access the plug). jd.
50
.050in.