The only thing this will do is to rest the computer. Problem doesn't exist in starting or charging system, have computer checked.
i'm pretty sure you just unhook the negative battery terminal and then rehook it.
Unhook the battery, overnight, and in the morning, rehook it. Make sure poles are clean.
Type your answer here.. unhook neg battery cable for 5 mins, and then rehook, this should reset computer
disconnect the negative (black) first then positive (red).
Unhook battery cables (both) for about 5-10 minutes. Then rehook. This may reset the system. If problem persists, then the CEL will come back on.
Just unhook the positive battery cable for 5 mins.
Disconnect the battery, wait 5 seconds, and reconnect it. It should start then. When you replace any electronic or electrical, the computer will not realize it until the car's computer is "reset". To do this, you must unhook, and the rehook the battery.
Scan tool or unhook the batteryScan tool or unhook the battery
You can unhook the battery or use a scan tool.You can unhook the battery or use a scan tool.
If you can get your vehicle started you can then un hook the battery while it is running and if your vehicle stays running then your alternator is good. If it stalls and dies as soon as you unhook the battery then the alternator is not good.If you can get your vehicle started you can then un hook the battery while it is running and if your vehicle stays running then your alternator is good. If it stalls and dies as soon as you unhook the battery then the alternator is not good.
Unhook the battery for a few minutes.Unhook the battery for a few minutes.
unhook old one ( positive first then negative) then put new one in ( negative first)