0
What else can I help you with?
What causes the 40 amp fuse to blow in 1999 Taurus?
This is the starter fuse I am talking about. It doesn't blow every time. It might go weeks before it blows again.
Can a 30 amp fuse replace a 40 amp fuse on a lawnmower?
You can replace a higher rating fuse with a lower rating provided it works with the device without constantly blowing. So try the 30 amp fuse in your lawnmower and if it doesn't blow and the mower works okay, you are fine. If it blows you will have to go back to 40.
What would have caused your 40 amp fuse to blow?
What Causes Any Fuse to "Blow?"The cause is what fuses were invented and are used for:to detect and protect against SHORT CIRCUIT conditions, and /or CIRCUIT OVERLOAD conditions.
Will a 120 volt circuit carrying a 2200 watt load blow a 15 amp fuse?
It will draw over 18 amps and will blow a 15 amp fuse.
What size wire cable and fuse for a 9.8KW shower?
7.2kW shower = 32 Amp fuse = 6 mm2 cable size7.5kW shower = 40 Amp fuse = 10 mm2 cable size8.5kW shower = 40 Amp fuse = 10 mm2 cable size9.5kW shower = 40/45 Amp fuse = 10 mm2 cable size10.5kW shower = 45 Amp fuse = 16mm2 cable size
What causes a 20 amp fuse to blow when starting a 1992 LeBaron that keeps overheating?
Need to know which 20 Amp fuse is blowing.
What fuse operates the convertible top on a XK8?
Fuse #13 or the 40 amp itm is the only forty amp
What would cause the ignitionstarter fuse 20 amp to constantly blow car starts but only with a larger amp fuse and a jump?
The starter is failing.
What is the 30 amp rdi fuse in a Lexus ls 400 fuse box?
What is the 40 amp RSI fuse in a Lexus rx 300 fuse box
Can you replace a 7.5 fuse with a 5 or 10?
You cannot because a five amp fuse would blow because the original fuse was seven point five. and a ten amp fuse would not blow quick enough to save or even be safe to use it in whatever you are using it for.
What causes the 40 amp ignition fuse to blow on an 2001 Mitsubishi Montero limited I replaced it and it still blows?
something on that circuit is shorted, the short needs to be repaired.
Can you fit a 13 amp fuse with a 3 amp fuse?
If you do that the likelihood is that you will blow the 3A fuse quickly. There is a reason why the current fuse is what it is, because it is expecting currents around 80% of 13 A or around 10 A.
