0
What else can I help you with?
How do you reset the change oil light on a 2004 grand am?
To reset the light, turn your ignition to on, then press the gas pedal 3 times, then start the car. To reset the light, turn your ignition to on, then press the gas pedal 4 times then you will hear a beep, then start the car.
How do you program a keyless entry remote on a 1993 Ford Explorer XLT?
put the red coded key in the ignition turn it to position 2 quickly 3 times listen for a beep once the beep has sounded leave it in the ignition press one of the buttons on the key in the ignition the the same button on the new key fob that will program the new fob signals to the origanl.
Why does your citroen xsara hdi only beep when you turn on the ignition?
You have an immobilizer problem. Try another key.
How do you reset the service indicator on a Mercedes c 220 Benz 2012?
To reset the service indicator on a 2012 Mercedes C220, turn the ignition to the "ON" position without starting the engine. Press the gas pedal three times within 10 seconds, then turn the ignition off. When you turn the ignition back on, the service indicator should be reset. If it doesn't reset, you may need to repeat the process.
How do you switch off the headlight sensor on a Renault Clio?
Turn the car off... Then turn the keys in the ignition until all the dash lights light up... Then turn you headlights on and off maually three times... You should hear a beep. that means you have disabled the sensor! :) Hope that helps... repeat the process to turn it back on! :)
Why does your ps3 beep three times when you turn it off?
The beeping is just telling you that the machine is turning off.
Reset oil change light on 2010 dodge avenger?
Turn ignition on... depress gas pedal to floor three times in ten seconds. Turn ignition off then on. Knock on windshield four times and turn ignition off again.
How do you turn off seat belt beep in pilot?
Clicking on your seatbelt will turn off the seat belt reminder beep.
How do you recode a Renault clio key?
Insert your key in the ignition. Turn it to accessories. Press your remote lock button until you hear a beep. Now it's configured!
How do you reset the service indicator on a VT Holden Commodore SS V8?
Key off.....Turn key to ignition WHILST holding the up & down buttons on the speed alert. The indicator will beep & "service confirmation?" will be displayed on the screen...pause for 3 seconds then press & hold the "set" button. The indicator will again beep & "no items" will be displayed
How do you reset oil light 2010 dodge caliber?
Turn on Ignition - depress gas pedal 3 times- turn off ignition
Why 01 mondeo auto locking?
Some one set it up to do so See instructions below for enabling and disabling it. Turn on the ignition so the dashboard lights are illuminated. DO NOT start the engine. Lock the door using the button on the door handle Then unlock the door (but do not open it) three times. Turn OFF the ignition. Lock the door using the button on the door handle Then unlock the door (but do not open it) three times. Turn on the ignition but don't start the engine - you will hear a distinctive beep. Lock the door again as before then unlock it (only once this time) - a final beep will be heard. Your doors will now auto lock when you pull away. This will also auto lock the doors in reverse. If you need to disable this feature, then repeat the steps above.
