The check engine light (service engine soon) comes on and stays on when a problem is detected by the self diagnosis system of your vehicle. Generally, the problem is in the emissions or something that is affecting the effectiveness of the emissions, but other causes can trigger the light to come on, too. To determine the cause, the vehicle will need to be taken to AutoZone or a shop that has an OBD2 scanner, or for 1995 and earlier models, an OBD1 scanner, While a scanner will not give you the magic answer, it will give you a code that narrows down the problem area.
engine is about to stall
I assume you have a 96 and up vehicle. If the light is blinking and then eventually it will stay on, it's always been a misfire code for me. Take your car to an autozone or advance auto parts and they will read the code for you. It will usually be plugs, wires, or a coil, depending on your car. Hope this helps.
There is a multitude of reasons a car could hesitate. Since the check engine light is on, there is a diagnostic code stored in the computer. You need to have the code read, some auto parts stores will do this for free and help you find the problem.
its most likely the air by pass valves and some coils that need to be changed.
It really depends on what the cause of the check engine light is.
pontiac g6 check engine light car with wrench
check the air intake
A malfunction indicator light is also known as a check engine light. It is a light on the dashboard of a car that goes on when there is a problem with the car's engine.
Yes you can. But you will want to check you're engine soon.
You check engine light is signaling to you that there is something wrong with you car. You should have your car looked at by a professional.
It is safe to drive you car for at least one mile after the check engine light comes on.
The Car Coach - 2011 Check Engine Light was released on: USA: 31 March 2011