That's easy... it's all in your mind, the last Chevy prizm model year was 2002
pull the shaft
How do you adjust the emergency brake on your 2001 S10 Chevy?
The 2003 Chevy S 10 emergency brake can be adjusted with the emergency brake adjustment bolt. The adjustment bolt will be on the emergency brake pad.
First I would have the rear rotors removed to inspect the emergency brake shoe's and rotor for wear. Sometimes people are known to drive with the emergency brake engaged which will wear the shoe and rotor. If they are still within specs, there is an adjustment on the shoe's
Bad switch on the emergency brake handle.
the emergency brake is on the right side on the console
A stock emergency brake, on a Chevrolet truck, can be released by manually disengaging the emergency brake. This can be accomplished by loosening the tension nut on the brake.
You can adjust your 1989 Chevy Corvette emergency brake into different ways. The emergency brake will have an adjustment bolt on the brake pad. The emergency brake cable can be adjusted to shorten or lengthen the cable.
Either your emergency brake is engaged or the brake fluid level is low in the brake master cylinder in your engine compartment
If the light stays on when the emergency brake is not engaged, this indicates the brakes are getting low and need to be replaced.
The emergency brake release on a 2010 Chevy Malibu is located beside your left foot. You would push down on the emergency brake pedal to release it while having your right foot on the regular brake.
it does that on mine becsue the brake doesnt work if ur break works its probally a short or something