This is indicative of an electrical fault or problem causing the failure of multiple lights. The first steps should involve checking the switches and relays. The next steps are checking the switch assembly. Had
check the brake light relay under the hood
On the 2004 Yamaha V Star 650, the hazard lights are typically activated by a switch located on the left handlebar. Look for a button or switch marked with a hazard symbol (usually a triangle). When pressed, this will activate the hazard lights, allowing both turn signals to flash simultaneously. Always refer to your owner's manual for specific details related to your model.
Um... Aren't all brake lights in the back of a car?
I have 05 with no brake lights
They are tied to either the brake lights or the tail lights.
They are tied to either the brake lights or the tail lights.
Where is brake light fuse for 2004 Ford Explorer located
w to replace center brake light in 2004 jeep liberty
If you turn/hazard lights don't work, or work when they want to, even if its just the turn signals or just the hazard likes that stop working, it gonna be the relay/flasher unit. It's located under your hazard light button. Your hazard light button sits on top of the unit. So if you have a persiting problem or an intermitant problem it's gonna be that unit. You can take off the portion of you dash that contains your vents, hazard light button and light dimmer poteniometer simply my just carefull prying it out srom its clips, be carefull when pulling it out as not to brake any of the plastic.
I tried all the fuses, the parts that under the brakes I checked that. All lights come on and working except the brake lights no break lights.
Yes, it is the same fuse used for the rear brake lights.
replace brake light switch located on brake pedal under dash