The same thing happened to me this week with my '96 Explorer . Battery light came on, would not go off. But my amp meter is showing that my alternator is doing its job. I left the lift gate open for about 2 hrs and when I went to start it the battery would not turn the engine over. Jumped it and didn't have a problem...but that battery light was still on. If the serpentine were slipping enough to cause the battery light to stay on it would also be squealing non-stop, so I never thought that. I disconnected the negative battery cable and drove it for about 4 miles with no problems, I figured the alternator was not the problem. Installed a new battery from another vehicle, battery light still stayed on. I then got a piece of scotch brite and die-electric grease and disconnected every ground wire and strap I could find including batt cables. Battery light still on. I then had my son sit in the drivers seat and instructed him to let me know if/when the battery light flickered. With the truck running I started wiggling wires and connectors, when I got to the back of the alternator he told me it blinked. I shut it off, disconnected the neg battery cable, popped the connectors off the back of the alternator cleaned and greased all the connectors. Started the truck the battery light was off and has stayed off.
my battery light keeps coming on why is that, ive replace the battery and it still happening please help?
The daytime running light module on a 1996 Ford Explorer can be found behind the bumper. It is on the driver's side of the car.
I'm not a mechanic / technician but have the battery cable or cables been off your battery
could be a bad alternator or battery
where is the head light timer on 96 ford explorer
On a 1997 Ford Explorer : If each remote takes ( 2 ) coin style lithium 3 volt batteries ( like the 1995 and 1996 models do ) ( it is the # 2016 battery )
As far as I know the keypad has to be changed ( my 1995 Ford Explorer XLT keypad doesn't light up anymore , also )
disconnect the battery
To reset the check engine light on a 1996 Geo Prizm, you can disconnect the negative battery terminal for about 15 minutes. This will clear the engine codes and reset the light. Alternatively, you can use an OBD-I scanner to clear the codes if you have one. Just ensure any underlying issues are resolved to prevent the light from coming back on.
Yes , fuse # 2 , 7.5 amp for High - mount stoplamp on your 1996 Explorer
is the humming coming from the front end of the vehicle? i have a 1996 explorer with the same issue. yes the noise come from the front but not all the time seems to make the humming noise when it gets hot
The battery light on usally means that the alternator is not charging. Take to local Autozone and they can check it for free.