0
The battery cable connection turns white with a white residue due to buildup of electrolyte (acid) on the terminal. Most batteries have seals, so this should not happen unless, perhaps, you overtorqued the terminals. Some buildup is normal. You should not have to overtorque, because you should always clean terminals before reattaching them.
What else can I help you with?
How do you repair a bad ground connection on your car?
You need to clean the connection where the ground is faulty. Start at the battery. Take off the cable wire brush the battery and cable then spray with some white lithium grease to prevent futher problems.
Why does my ice leave white residue?
The white residue on your ice is likely caused by minerals and impurities in the water that freeze along with the ice. This residue is commonly known as "white ice" and is harmless to consume.
What is a color combination of a straight-through cable connection?
White/Orange Orange White/Green Blue White/Blue Green White/Brown Brown Both ends will have the same pattern. In a crossover cable, one side will have this pattern, but the other end will be different.
Why does water leave white residue on surfaces?
Water can leave white residue on surfaces because of the minerals it contains, such as calcium and magnesium. When the water evaporates, these minerals are left behind, creating the white residue known as limescale.
How do you connect speakers to you lap top computer?
depends on the type of connection you have. if you cant come out of the laptop any other way then plug into the headphone jack with a cable that ends in a left right rca connection (the red and white cable) and plug that into your speakers.
Why does my water leave a white residue?
The white residue left behind in your water is likely caused by minerals such as calcium and magnesium, which are common in hard water. When the water evaporates, these minerals can form a white residue on surfaces. Using a water softener or a vinegar solution can help reduce this residue.
Is the white battery cable on a camper trailer positive?
White is typically the Negative or ground side of the system. If in doubt it is best to trace the battery cables to see where they go. The ground will always be attached to the frame of the camper some where close to the battery. Make sure the cable is attached to the frame and not an insulated stud attached to the frame. Insulated studs will have a rubber or plastic boot on the stud.
Does a low residue diet allow white wine?
Yes White wine is essentially a clear liquid and suitable for low residue diets
What causes white residue from water to form on surfaces?
The white residue from water is caused by minerals, such as calcium and magnesium, that are left behind when the water evaporates. This residue is commonly known as limescale or mineral deposits.
What causes tap water to leave white residue behind?
The white residue left behind by tap water is typically caused by minerals such as calcium and magnesium that are present in the water. When the water evaporates, these minerals can form a white, chalky residue on surfaces.
Why does my water leave white residue?
The white residue left behind in your water is likely caused by minerals such as calcium and magnesium. When water evaporates, these minerals can form deposits, known as limescale, which appear as white residue. This is common in areas with hard water.
Why does tap water leave white residue behind?
Tap water can leave white residue behind because it contains minerals like calcium and magnesium. When the water evaporates, these minerals are left behind, forming the white residue known as limescale.
