Warning for Change oil schedule or Low oil pressure. Check also the Oil sensor malfunction.
A yellow flashing engine light is an indication that the engine should be checked. The yellow flashing light can because by low water level or low motor oil.
Oil pump needs replaced.Oil is not traveling through vehicle when pump is bad. Oil pressure sensor needs replaced if check engine light comes on.
To stop the change oil light from flashing on your Citroën Relay van, first, ensure you have changed the engine oil and replaced the oil filter if necessary. Then, reset the oil change indicator by turning on the ignition without starting the engine, fully pressing the accelerator pedal three times, and then turning off the ignition. Finally, start the engine to confirm that the light is no longer flashing. If the light persists, consult the owner's manual or a professional mechanic for further assistance.
check the fluid in your engine it might be low.
With the engine off, press and hold the odometer reset pushbutton. Start the car. Keep finger on odometer reset pushbutton until "oil life" message starts flashing. Release the button.
To stop the oil light from flashing, first check the oil level using the dipstick; if it's low, add the appropriate type of oil. If the oil level is adequate, the issue may be due to a faulty oil pressure sensor or a problem with the oil pump. In such cases, it's best to consult a mechanic for a thorough diagnosis. Ignoring the flashing oil light can lead to serious engine damage, so addressing it promptly is essential.
The check engine light may be flashing on a 1996 Honda Accord if a timing issue is detected or oil pressure is low. The exact cause can be determined by connecting an OBDII code reader.
From my research, it is indicating low oil pressure. Mine does it when the key is on but the engine is not running, thus low oil pressure.
A flashing oil light can be warning you of an oil pressure problem. The quantity of oil can be fine but the oil pressure may be low due to other problems.
Have it checked by a mechanic, poor oil pressure is really dangerous for the engine. You might start with checking that you have the right oil level though.
It means, that you have to refill oil and cooling water.
If the oil light is flashing in your 2001 Mazda Tribute, it typically indicates low oil pressure or that the engine oil level is low. It's essential to check the oil level using the dipstick and add oil if necessary. If the oil level is adequate, the issue may be due to a faulty oil pressure sensor or pump. In either case, it's advisable to address the issue promptly to avoid potential engine damage.