0
What else can I help you with?
Why does car alarm activate when you use your indicators or hazards?
Car alarms may activate when using indicators or hazard lights due to a wiring issue or a sensitivity setting in the alarm system. Some alarms are designed to respond to electrical signals, and if the system is overly sensitive, the activation of indicators can inadvertently trigger the alarm. Additionally, if there is a fault in the alarm's installation or wiring, it may misinterpret signals from the vehicle's lighting system as a security threat.
Which fuse is the security alarm fuse on a 2004 Hyundai Elantra?
If you're talking about the alarm that is the same as the panic alarm, i have the same problem. I rear-ended someone a while ago and ever since then, my alarm has been going off randomly, apparently because the hood switch is defunct, setting off the alarm at random. The way I fixed it, although i don't recommend it, is to remove the fuses for the hazard lights and the alarm siren. POSSIBLE SOLUTION: Unplug the following fuses: The hazard lights fuse is in the fuse box inside the car, read HAZARD. The alarm siren fuse is in the fuse box under the hood, read ECU. Unfortunately, you won't have any visible or audible indication you locked or unlocked the doors anymore. Even more importantly, you won't be able to use your hazard lights unless you plug it in again when needed (if you have time). I think it's illegal to drive without hazard lights available, because it could be dangerous. Currently, I have those fuses plugged in and I'm just unplugging the main fuse to turn off the whole fuse system when i park for long periods of time, to not drain my battery, until i find a better solution. Hope this helped!
Is there an alarm if you leave lights on a 2002 VW Jetta wagon?
I have a '03 and there is an alarm if you leave tour lights on.
What does the body control module control on a 2000 Chrysler grand voyager?
Wipers, door locks, lights, alarm if equippedWipers, door locks, lights, alarm if equipped
Why do the hazard lights come on in your Land Rover Discovery after driving over corrugated roads?
Most likely your alarm ecu has broken loose from the mounted position, if its loose and gets knocked around. It will turn on the hazard lights, thinking that you have had a impact related to an accident. Easy check remove the trim panel below the glove box. and look for a green box maybe 1" thick by 5" long. give it a wiggle and see if it moves. If so simply get some zip-ties and strap the box down so it cant get knocked around.
Which alarm condition indicates the attack is over and CBRN contamination UXO and other hazard's are suspected or present?
Alarm Black
Which alarm condition indicates the attack is over and CBRN contamination UXO and other hazard are suspected or present?
Alarm Black
What circumvents the manual control for hazard lights Our Hazard lights in out Land Rover are still on after going over a dip in the road?
The hazard lights came on after the dip in the road, mostly cause by the alarm control unit coming loose and getting knocked around, which will trigger the lights..thinking the vechicle has been in an accident. Remove the trim panel below the glove box and look for a green box maybe 1"thick and 4" long. it will be loose and just hanging by the wiring. Best fix is to secure it with tape or zip ties so it cant be knocked around. Best of Luck
How do you reset your cat1 alarm on landrover discovery?
disconnect battery
Why won't my 1997 Volvo 850glt start and the hazard lights flash?
Sounds like your security alarm has been triggered. Take the keys out of the ignition, get our of the car, close the door and lock and unlock it WITH THE KEY. Then try starting.
Where is the fuse box on Vauxhall omega?
2001 omega lost its indicators i check the fuse's indicators flash when alarm gos off please help thanks simon
Why do your hazard lights on your Renault clio not turn off?
If the hazard lights on your Renault Clio won't turn off, it could be due to a faulty switch or a malfunction in the electrical system. Check to ensure that the hazard light switch isn't stuck or damaged. Additionally, there may be an issue with the relay or fuses related to the hazard light system. If the problem persists, it's advisable to consult a mechanic for a thorough diagnosis.
