0
What else can I help you with?
Why dont the indicators work on my 1973 beetle but my hazards do?
cuz there broke.. try flasher or turn signal
Why do my Headlights flash on and off when turn signal is on?
You could be hitting the flash feature on the turn signal arm when you use it.
Why does the turn signal on my vw beetle flash rapidly?
One of you signal lamps is probably burned out. Turn on the signal and walk around the car, bet-ya you find one turn signals isn't lighting up. Some times it is a bad connection at the bulb. The bulb sockets are cheaply made.
What are turn signal indicators?
Turn signal indicators are lights. The flash to tell you, or indicate, that a turn signal is on, and which way the lights are flashing.
How do i Replace the rear turn signal bulb on a 05 beetle?
no no
Why does the turn signal flashes to fast in a 2002 pontaic Montana?
You need to replace the turn signal bulb. When bulb is burnt out the turn signal will flash faster.
If the turn signal flasher on my instrument panel doesn't flash but the turn signal does what could be the problem?
Burnt out bulb.
Why does your turn signal flash rapidly and your bulbs are working?
Your "turn solenoid" is defective.
Why don't the front passenger turn signal flash on a 97 mercury tracer?
Your turn signal probably is not flashing because the turn signal lightbulb is burnt out. You could also have a loose wire on the turn signal.
What makes the blinker sound when blinker is activated?
The turn signal flasher is what makes the noise and lets the turn signal flash.
Why do the turn signals turn on but don't flash?
Probably need a new turn signal bulb.
How do you replace turn signal for 1971 vw beetle?
To replace the turn signal on a 1971 VW Beetle, first, disconnect the battery for safety. Remove the screws securing the turn signal assembly, typically located on the steering column. Carefully detach the old turn signal by pulling it off and disconnecting the wiring harness. Install the new turn signal by connecting the wiring, securing it in place, and then reconnecting the battery to test for proper function.
