Because it is a wheel which flies or rotates about a fixed axis.
buy it at sears/parts.com called a flywheel tool remover.
The flywheel, also called a flexplate, is in between the engine and transmission.
Yes, on the crankshaft there should be a "slot" called a keyway, and a matching slot on the flywheel, mate a key in the slot of the flywheel and crankshaft, and then your flywheel should be timed, also on a magneto ignition system, makesure the magneto has the proper gap, called "armature air gap" usualy if you put a buossness card in there is a good starting point
The force acting on a flywheel is typically the torque applied to it by an external source, such as an engine or motor. This torque causes the flywheel to rotate, storing kinetic energy in its spinning motion. The force required to accelerate or decelerate the flywheel is dependent on its mass and angular acceleration.
With a special tool. It's called a flywheel puller.
solid disc type flywheel rim type flywheel
No. The flywheel is dependent on the transmission.
Why does my flywheel keep bending..
Flywheel
55ftlbs flywheel to crank
will 4.6 windsor engine with 6 bolt flywheel interchange with 8 bolt flywheel
Flywheel is used to store Rotational Energy.