answersLogoWhite

0

Can you move the belt by hand? Look for something jamming the belt. Just replacing the fuse won't help until you fix whatever it is that is causing it to blow a fuse. Don't use a bigger fuse or you may fry the wires inside, making it more expensive to repair

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

Vauxhall vivaro 15a stop fuse blowing?

Fix the fault blowing the fuse.


Your fuel pump fuse keeps blowing?

You may have a problem in the pump. Take it off and check .


Why is your Yamaha virago 250 blowing fuse?

Which fuse is blowing? Yamaha XV250 Virago Manual Cyclepedia.com


Fuse blowing on ford 1995?

Which fuse is blowing. You need to be a little more specific so we can help you. the ignition fuse under the hood


Fuse keeps blowing on 95 Suburban for tail lightsdash board?

had similar problem ended up being pigtail for my trailer lights had a bad connector and a spot where insulation rubbed off creating a short and blowing that fuse


Would a battery going bad cause a fuse to keep blowing out?

not usually!!if fuse is blowing out check for short!!


Why do my abs fuse keep blowing?

Obviously, if any fuse keeps blowing there is a serious fault in that circuit.Take it somewhere they can fix it.


What do you do if the fuses keep blowing?

Find out why the fuse is blowing. You have a short or the circuit is overloaded.


What does the am2 fuse run in a es300 Lexus?

fuse keeps blowing


Why does the 20 amp fuse for the starter-fuel keep blowing on your 2002 sebring convertible?

It is very common for the starter to be the cause of that fuse blowing.


Why does my dryer fuse keep blowing?

Your dryer fuse may keep blowing due to a variety of reasons, such as a clogged vent, overheating, or a faulty heating element. It is important to check these components and address any issues to prevent the fuse from blowing repeatedly.


I took the limiter off my ajutor electric ped and its been fine but recently the fuse keeps blowing Ive replaced it and this time melted abit of battery housing anyone know what could be up and how?

Taking the limiter off means that you're pushing more amps than intended through the motor, which is why the fuse keeps blowing. Blowing fuses is a sure sign that something is wrong, either in the machine or its usage. Back off and put the limiter back before you destroy something expensive. If that doesn't worry you you can always try with a higher rated fuse.