over fluxing means?
A: It refers to adding unneeded flux to a connection while soldering that connection
The alternator is over or under charging.The alternator is over or under charging.
The alternator is over or under charging.The alternator is over or under charging.
the regulator in your alternator must be in trouble remove the alternator and take it to an alternator repair shop or fit a new alternator
no
In most cases an alternator will last well over 100,000 miles
A flux or fluxing agent is a source that bonds things together. When soldering wires, a flux is used as a glue that helps the wires melt and stick together. Flux is made of an adhesive and a petroleum jelly.
Start replacing the 2000 s10 alternator by disconnecting the battery. Remove the air inlet hose, and the serpentine belt. Take off the bracket over the alternator if it has one. Unbolt the alternator and disconnect the wires. Reverse the procedure to install the new alternator.
It will destroy the battery.
with a copper self fluxing brazing rod type suggested by AWS
220 alone for the alternator n 150 for labor cost totaling over 300 dollars
Bad bearings in the alternator. Best to just go ahead and replace it.