Its a cheap way to prevent water from soaking your battery and also prevents corrosion on the terminals.
Changing the battery on a Mazda 6 is very easy to do. You will first need to remove the bar that is over the battery, then you will need to remove the battery terminals. After the battery is removed, put the new one in and put the battery terminals back in place, and put the bar back on.
I use a stiff wire brush to clean them, then put a thin coat of Vaseline on them to help prevent future corrosion.
It is very easy to change the battery in a 2004 Ford Escape. You will need to remove the bar that is covering the battery first. Then you will just need to take the battery terminals off the battery and then remove the old battery. Put the new battery in and put the terminals back on in the correct order. Then put the bar back over the battery and it is ready to go.
Coating your car battery's positive and negative terminals with Vaseline will delay their natural inclination to corrode. It is a well known fact that sugar will corrode your teeth.
You can get a tin of terminal cleaner at your local auto parts store and it will help keep it clean after you have cleaned the terminals with it. Make sure your battery is fully charged.You can also get a paint that can be sprayed on the terminals to help prevent corrosion. If you want to go cheap i would suggest just keeping your motor clean and sand down the rust that gets on the plugs. Second answer Clean the terminals with sand paper or a wire brush. Then rub vaseline to the connections and the battery poles. Then reconnect the battery. The vaseline keeps air away from the parts and stops coroision from coming back
Baking soda mixed with water. and if this is like on your car battery put some Vaseline on it to keep it from coming back.
If it's the same group size & terminals.
The function of battery terminals is to connect a load or charger to a cell battery. Battery terminals are necessary and common in a lot of batteries.
if it has the stock terminals, you need a 1/2" wrench. disconnect the terminals, starting with the negative (black). then, disconnect the red (positive). use a 10mm socket to remove the bracket that holds the battery down, and pull the battery out. put new battery in, put positive terminal on first, then negative, then put on bracket.
Corroded battery terminals, defective battery, or starter.Corroded battery terminals, defective battery, or starter.
Most battery terminals are made of lead.
just like any other battery nothing special disconnect the terminals, remove the battery and put new one in