0
Why would a 1998 Hyundai manual clutch not release the slave seems to be working properly but the clutch won't disengage. Kim?
sometimes the spring on the clutch plate breaks off and will not engage fully to the flywheel or the pilot bearing is sticking not moving freely
I had this happen to me on a suzuki sidekick 1989 could not put into gear while engine running
but could when the engine was off ,testing by putting it in first gear and starting engine
while putting my foot on the clutch pedal ,,will work but if you can no change to seconde gear then you have a broken spring in the clutch area,, hope this helps
What else can I help you with?
How do you disengage the safetydry fire mechanism on a browning medalist pistol?
You need to see a gunsmith if it isnt working properly.
What do I do if there is no sound coming from my speakers but it says a CD is playing in 2009 Hyundai Accent?
You might check the wiring of your speakers and check if they are working then check your CD player if its working properly.
How do you open a Hyundai tiburon hood when latch is not working?
If the hood latch on your Hyundai Tiburon isn't working, you can try pulling the release cable from inside the car, usually located near the driver's side footwell. If that doesn't work, you might need to access the latch directly by using a long screwdriver or similar tool through the grille to manually disengage the latch. Alternatively, you can also check underneath the front bumper for access to the latch mechanism. If these methods fail, consider seeking professional help to avoid damaging the hood or latch.
Is your computer working properly?
Yes, my computer is working properly.
How do you unlock a Hyundai television?
how to unlock a Hyundai tv my unlock button on my remote isnt working
How do you disengage a kia 2002 out of four wheel drive?
if the hubs are working properly all u do is shift transfer case back to 2WD if hubs are not releasing you will have to check the hubs best idea change the auto hubs for warn manual locking hubs
How do I get the Gear on starting motor to disengage from flywheel?
Not sure what engine you are working on but sometimes you can roll the engine backward and get the gear to disengauge .
When a catalytic converter is not working properly will it cause the engine to not run properly?
it is ok to continue driving the vehicle while the catalytic converter is not working properly?
How do you check if RTD pt100 is working properly?
To check if RTD PT100 is working properly you need to check and make sure all the wires are connected. Take several readings and if they are the same, it is working properly.
Why your 2000 Hyundai accent gl speedometer not working properly?
You may have a bad output sensor or the wires are loose on it. the output sensor is located behind the air mixture box. to remove it you will need a 10MM wrench and about 30 minutes.
How do you use the word disengage in a sentence?
disengage means to abruptly stop a plan or mission, or stop or pause a mechanism from working. example: "Disengage landing!" ...Is what a pilot might say in his radio com to other planes if there is danger on the landing grounds.
How change headlight on Hyundai 2001 xg300?
To change the headlight on a 2001 Hyundai XG300, first, open the hood and locate the headlight assembly. Disconnect the power connector from the back of the headlight bulb and remove the retaining clip or twist the bulb counterclockwise to release it. Replace it with a new bulb, making sure not to touch the glass with your fingers, and then reattach the connector and secure the assembly back in place. Close the hood and test the new headlight to ensure it's working properly.
