answersLogoWhite

0

Either someone has used a belt dressing that left a residue on the pulley or there is a bearing oil seal leaking in the vicinity of the pulley. A few more details of the pulley's environment would be helpful.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

Why would you have oil on your alternator and pullies does that mean the switch is leaking?

I would check front crankshaft seal or timing cover gasket. The Crank pulley might be "throwing" oil on to the belts and Alternator.


Where is the oil pump on a 99 Toyota Camry?

You have to remove the timing belt and the crankshaft pulley if you want to get access to the oil pump. The oil pump itself is just behind the crankshaft pulley.


Are water pumps off a 1998 an 1994 dodge ram 1500 the same?

The 1994 would have a bolt on pulley while the 1998 had a pressed on pulley. Other than that they are same. A new pump would be of the pressed on pulley style.The 1994 would have a bolt on pulley while the 1998 had a pressed on pulley. Other than that they are same. A new pump would be of the pressed on pulley style.


How do you replace oil pump on 22re?

it is quite involved it is behind the engine front crank pulley you need to remove the oil pan and the pulley not to mention the radiator to give you some space to work


Where is the oil pump located on a 1997 Saturn Twin Cam?

The timing chain cover IS the oil pump. You need to remove the dampener pulley (that's the pulley that drives the serpentine belt) then you can remove the timing chain cover/oil pump.


How do you remove and install a 1998 Nissan altama idler tension pulley The pulley the space between the pulley and body of car is only about an inch does not have enough room to pullout?

The idler pulley is mounted on a plate that needs to be removed. In order to remove the plate with the idler pulley, you must remove the engine mount to get out the idler pulley. To remove the engine mount, you need to jack-up the engine from the bottom of the oil pan (Note: place a piece of wood plank between the bottom of the oil pan and the jack). The idler pulley is mounted on a plate that needs to be removed. In order to remove the plate with the idler pulley, you must remove the engine mount to get out the idler pulley. To remove the engine mount, you need to jack-up the engine from the bottom of the oil pan (Note: place a piece of wood plank between the bottom of the oil pan and the jack).


Harmonic balancer pulley?

it is a pulley located on the front end of the crankshaft,ussually at the bottom of the engine.this pulley is the one that drives the accesories and drives the oil pump on some cars.it is held on to the crankshaft by a bolt wich is right hand threaded on most engines.also has a seal and a woodruff key,the seal will keep the oil from leaking and the key so the pulley does not turn around.and it is also called crankshaft pulley.


What type of gear pulley to use totake off oil pump on 1996 Mazda millenia 2.5 engine?

what type of gear pulley to use to take off oil pump on 1996 Mazda mellinia?


Where is oil pump on beetle?

It is on the pulley end of the engine, straight down from the crank pulley. There is a square plate with turned-up edges that's held on with four 13mm nuts...that's the oil pump cover.


Is a wheelbarrow a pulley?

No it is a lever because you are pushing it forward. If it was a pulley, you would pull it and the object would come down.


What is bottom pulley called on 97 Chrysler cirrus lx?

That would be the crankshaft pulley.


What arrangement of moveable and fixed pulleys would give a mechanical advantage of 3?

One fixed pulley and two moveable pulleys would give a mechanical advantage of 3. The rope would go through the fixed pulley, then the first moveable pulley, back through the fixed pulley, and finally through the second moveable pulley.