cast iron
Stainless steal or cast iron typically
Inlet manifolds are actually called intake manifold and this is to allow air to be injected into the fuel for either a rich or lean mixture for either performance or gas mileage (which can be adjusted). The Exhaust manifold is used to expel your burnt fuel, or air/fuel mixture, during the exhaust stroke on a 4-cycle engine to allow room for the intake stroke to bring in your fuel, or air/fuel mixture. The exhaust manifold simply directs the exhaust and become extremely hot. The exhaust is pushed out by the exhaust stroke.
an exhaust flange gasket, is the gasket,commonly called a donut that is used to seal where the exhaust pipe is bolted to the exhaust manifold
A puff of smoke that's in a shape of the exhaust pipe A gasket/seal that is shaped like a donut. They are used between the manifold and the exhaust pipe.
in the exhaust manifold. is there any place to buy a used one?
Mechanism with side camshaft and Mechanism with overhead camshaft both valve actuating mechanisms are used to operate inlet or exhaust valves.
Seals manifold to block. metal-metal usually not airtight seal so gaskets used between surfaces.
Oxygen sensor
The part number for a 2003 Toyota Highlander exhaust manifold is 7929-05171259. The part number can be used to find remanufactured replacement parts.
Mechanism with side camshaft and Mechanism with overhead camshaft both valve actuating mechanisms are used to operate inlet or exhaust valves.
Yes glycol (used in anitfreeze) is flammable
no need to answer. I found out all by myself. 26MM