Service manual says,(241cm (8.48 Imp oz-8.15 US oz) Recommended oil , 15wt or equivalent
The 1985 Yamaha XJ700 Maxim requires approximately 10.6 ounces (or about 315 milliliters) of fork oil per fork leg. It's important to use the manufacturer's recommended fork oil type and viscosity, typically 10W for this model. Always refer to the service manual for specific guidelines on maintenance and oil levels.
352cc of 10wt fork oiul
3.7
qt fork oil and type oil for the front fork on each side
According to the Yamaha Service Manual 17.6 US oz/18.3 Imp oz per fork is the standard capacity.
How much fluid in the front forks of a 1985 atc 250r take. I am changing the fork seals
Each front fork holds: 400cm3 or 14.1 oz or 13.5 US oz.
I think 1L to 1.5L will be the quantity.
For the 2000 Yamaha DT175, each fork leg typically requires about 400cc (or 400ml) of fork oil. It's important to check the owner's manual or service manual for your specific model for any variations. Additionally, ensure you use the recommended type and viscosity of fork oil for optimal performance.
12.75 .oz #10 fork oil 6psi pressure
About 137bhp at the back wheel
800cc