0
You had the rear struts of your 98 Lexus es300 changed and now the trac off light is blinking and the abs light is on and its not reading on the diagnostic computer?
Wiki User
∙ 17y ago
Bring to a shop that has an ABS scanner
Wiki User
∙ 17y ago
Add your answer:
Earn +20 pts
What car computer diagnostic system would work on a peugeot 307?
For just reading codes, any OBDII scanner.
What does a diagnostic reading of 42 mean for a 1992 Buick Centery?
code 42 is for the electronic spark timing circuit -computer timing control.If you need the diagnostic flow chart to test this email me at chickenbones62@yahoo.com and i will email it to you good luck with your repair!
How do you mark a waddington diagnostic reading test?
You should always mark a Waddington Diagnostic Reading Test with a number 2 pencil. Mechanical pencils and ink pens will not work.
1998 expedition Engine light on blinks while driving has heavy hesitation wasting fuel?
Borrow, rent or buy a computer diagnostic scanner from your local auto parts retailer. If the light is blinking, the computer is trying to tell you what's wrong. You need to connect the diagnostic scanner to find out what's wrong. Many auto parts retailers will even help you figure out what's wrong by assisting you with the connection and reading the results. It could be as simple as a faulty oxygen sensor or throttle position sensor, but it could also be a lot more complex than that. Good luck.
What would cause no daignostic reading to be available on a 2001 cavalier?
The primary cause for no diagnostic reading to be available on a 2001 Cavalier is a faulty connection or code reader. The computer is designed to automatically transmit codes once an ODBII code reader is connected to the port.
Your oil pressure light in your 84 Lincoln town car while not stop blinking and it will shut your car of constantly you have changed every major part what else could it be?
Check for a Oil Level Sensor If It Has One It Could Be Reading Faulsly.....
Diagnostic codes for 88 Plymouth reliant?
It's not a code ,it's the start of the diagnostic programn.codes follow ,then 55 to end code reading.
Why is my service engine light on in my 2000 Blazer after we replaced all the parts the computer read when we had it plugged in and rebooted the computer?
You've missed something. The sensor system of a 2000 blazer is extensive, reading everything from engine knock to exhaust O2 levels. Replacing every sensor related to every system would costs hundreds, if not thousands of dollars. Buy a code reader specific to your vehicle. This will allow you to communicate with the onboard computer and allow it to tell you, through blinking lights, what system is malfunctioning. Get a computer diagnostic done at your local 'trusted' mechanic. If the computer is malfunctioning, you'll know right away and if there are codes, they'll tell you what needs to be replaced. Have the mechanic reset the computer after repairs and check for further codes.
How do you read diagnostic codes Chevy Suburban?
Reading diagnostic codes is easy. The driver plugs the reader/scanner into the diagnostic port of the vehicle, and the scanner/reader will give a code if there is a problem, and tell them the type of problem.
Computer reading glasses?
You can get a pair of computer reading glasses at most pharmacies and Walmart stores.
What reading material is available on diagnostic testing?
Fischbach, Frances Talaska. A Manual of Laboratory and Diagnostic Tests. 6th ed. Philadelphia: Lippincott Williams and Wilkins, 2000.
How do you reset the oxygen sensor on your 2004 Chrysler town and country van?
All I do is when I replace one I then use a diagnostic scanner to erase the code. Then the computer starts reading it again bc the error code is gone. This forces the computer to check it by normal cycle checks. Good luck.
