Check your Crankshaft position sensor. Located on the right of the crankshaft. Probably got damaged when belt broke.
bad alternator, bad voltage regulator, bad battery, bad connections.
The positive battery terminal cable will always run to the alternator- just follow it down.
Battery is not charging due to defective alternator or the battery itself needs to be replace.
Loose alternator drive belt or loose or corroded battery cables. The battery itself may also be bad.
To replace the alternator on a 1995 Mazda Miata, first disconnect the negative battery cable to ensure safety. Remove the serpentine belt by loosening the tensioner, then unbolt the alternator from the engine. Disconnect the electrical connections from the alternator, install the new alternator, reconnect the electrical connections, and reattach the serpentine belt. Finally, reconnect the battery cable and start the engine to test the new alternator.
2002 Mazda tribute, what is cylinder misfire My #5 cylinder has a misfire. Battery light also flickers according to idle. So far not alternator. Alternator and battery was replaced maybe 2 years ago.
To replace the alternator on a 2004 Mazda MPV, first disconnect the negative battery terminal to ensure safety. Remove any components obstructing access to the alternator, such as the drive belt and electrical connections. Unbolt the alternator from its mounting bracket and carefully lift it out. Install the new alternator by reversing these steps, ensuring all connections are secure before reconnecting the battery.
Change your alternator
the common cause why the light is on is that your alternator is not working well,try to have your alternator checked .may be the carbon brush is already worn out.
To change the alternator on a 2015 Mazda 6, first disconnect the negative battery cable to ensure safety. Remove the serpentine belt by loosening the tensioner, then detach the electrical connections from the alternator. Unscrew the mounting bolts to remove the old alternator, and install the new one by reversing the steps. Finally, reattach the serpentine belt and the battery cable.
To change the alternator on a 2005 Mazda 6, first disconnect the battery to ensure safety. Remove the serpentine belt by loosening the tensioner, then unbolt the alternator from its mount and disconnect the electrical connectors. Install the new alternator by reversing these steps: connect the electrical connectors, secure the alternator with bolts, and reinstall the serpentine belt. Finally, reconnect the battery and check the system for proper operation.
To change the alternator on a Mazda MX-5, first, disconnect the negative battery cable to ensure safety. Remove any components obstructing access to the alternator, such as the engine cover or air intake. Disconnect the wiring harness and the mounting bolts from the alternator, then carefully remove it from the engine bay. Install the new alternator by reversing the process, ensuring all connections are secure before reconnecting the battery.