0
You have an edelbrock intake and carb what other parts will be needed to hook up the throttle linkage?
if you got an automatic transmission you may have to get a kick down linkage so your transmission will down shift if it needs to when you give it gas that is only if there is not a button on the floor under your gas pedal if there is you dont need one the button does the same thing the cable does
What else can I help you with?
How do you get to the throttle of a 93 GMC Vandura?
To access the throttle of a 1993 GMC Vandura, you'll need to open the hood and locate the throttle body, which is usually found on the engine's intake manifold. You may need to remove the air intake duct and any associated components for better access. Once you can see the throttle body, you can inspect or adjust the throttle linkage and cable as needed. Always ensure the engine is off and cool before working on any components.
How do you change throttle cable on a white LT 185 lawn tractor?
To change the throttle cable on a White LT 185 lawn tractor, first, ensure the engine is off and disconnect the battery for safety. Remove the old throttle cable by detaching it from the throttle control lever and the engine's throttle linkage. Install the new throttle cable by threading it through the appropriate guides and securing it to both the throttle control and the engine linkage. Finally, adjust the cable tension as needed and reconnect the battery before testing the throttle's functionality.
How do you install a throttle cable on a 77 Datsun pickup?
To install a throttle cable on a 1977 Datsun pickup, first, remove the old cable by detaching it from the throttle linkage and the pedal assembly. Next, route the new throttle cable through the firewall and attach it to the throttle linkage on the engine, ensuring it is properly aligned. Finally, connect the other end to the accelerator pedal, adjusting the cable tension as needed for smooth operation. Test the throttle to ensure it opens and closes properly before securing everything in place.
What parts are needed to replace a 2 barrel carb on a 305 with a 4 barrel?
You'll need the carb, intake manifold, gaskets, air cleaner assembly, and any linkage that is different. If the carb is purchased new, you should be able to order the right linkage.
What is a industrial linkage?
Industrial Linkage is where the product of one company, is needed for production to take place in another company.
Where is the intake manifold runner located on a 2004 Ford Freestar?
The intake manifold runner on a 2004 Ford Freestar is located on the engine's intake manifold, which is situated on the top of the engine. The runners are part of the manifold assembly that directs air to the engine cylinders. To access them, you typically need to remove the air intake duct and possibly the throttle body, depending on the specific repair or inspection needed.
What are the types of linkage industry?
A linkage industry is one whose products are needed in another industry. An example is agriculture which can be linked to the food industry.
How do you take a 125cc governor off?
To remove a governor from a 125cc engine, first ensure the engine is off and cool. Locate the governor linkage, which is typically connected to the throttle and the engine. Disconnect the linkage and any associated springs, then remove the governor gear or assembly from the engine as needed. Be cautious and ensure you understand the system's operation, as removing the governor can affect engine performance and safety.
What size screw needed for Yamaha pw50 throttle limiter?
M5x80
How to change a throttle sensor?
unhook your battery. remove sensor. no setting is needed.
Why 99 Dodge truck will not shift in reverse?
Look under your truck and check the shifter linkages.1. Gearshift Linkage/Cable Mis-adjusted/Damaged- Repair or replace linkage parts as needed.
How much vitamin a is in a cutie?
59% of your needed daily intake.
