Take it to a shop. Cheap fix or call and ask if they have a deep socket!
yes but is is cost effective? that's your call
Repair kit availale at most auto parts stores
To fix a weed eater with a stripped spark plug hole, you can use a spark plug thread repair kit, which typically includes a tap and inserts designed to create new threads for the spark plug. First, clean the area around the hole, then tap it to create new threads. Next, insert the threaded insert according to the kit instructions, ensuring it’s securely in place. Finally, replace the spark plug and check for a proper fit to ensure a good seal.
How do u fix a stripped out oil pan
If the actual threaded part in the head is stripped, you have to use a tap and re-thread it. to avoid metal in the cylinder bore, u should take the head apart from the block to do it. I recommend doing this yourself, as a shop will probably charge you over $1000
only way to fix a spark plug is to replace the problem plug with a new one
no
Could be a few reasons, and can't be pinpointed without me actually seeing it "in action". But here are the most likely reasons, in order of likleyhood: 1) Spark plug not tightened to proper specs. Fix: tighen plug to proper specs with torque wrench. 2) Spark plug "washer" bad or gone. Fix: Replace washer. 3) Spark plug seals bad. Fix: Replace spark plug. 4) Bad threads in spark plug hole. Fix: Retap, or "Helicoil" it. 5) Crack in head near spark plug hole. Fix: Replace head.
no it can not start with a broken spark plug wire unless you fix it
You don't, you replace it.
take it to a radiator shop
a great way to fix this is to get whats called a timesert insert kit i did this on my 5.4 liter ford and it worked great without removing head its kind like a helicoil but special designed for this problem