answersLogoWhite

0

What else can I help you with?

Related Questions

What is wrong with 1996 chev 1500 shaking and pulling to left?

A 1996 Chevy 1500 shaking and pulling to the left could indicate several issues, including misaligned wheels, uneven tire wear, or a problem with the suspension components. The shaking might also be caused by unbalanced tires or damaged rims. It's essential to inspect the alignment, tire condition, and suspension parts to diagnose and fix the problem accurately. Additionally, checking for issues with the brakes or steering system could also help pinpoint the cause.


What can cause of pulling left after a steering shaft changed?

Pulling to the left after a steering shaft change can be caused by misalignment of the wheels, improper installation of the steering components, or worn suspension parts. If the steering angle sensor is not calibrated correctly, it can also lead to pulling. Additionally, uneven tire pressure or tire wear can contribute to the issue. It's advisable to have a professional inspect the alignment and steering system to identify the exact cause.


Why is your Ford Taurus is shaking and pulling to the left?

You need a front-end alignment. Most garages charge $50-$75.


What to do if your ignition and steering wheel won't turn?

sounds like the steering wheel lock is active. try pulling the wheel down to the left, and while holding the tension, turn the key.


2003 Megane steering pulling to left Got tracking done 3 times but remains the same any ideas?

This sounds like it could be the overall alignment of the car. The car should be aligned and then the steering should stop pulling toward either side.


Why does the steering for your ford bronco pull to the left or right depending on what way you turn a corner?

The steering of your Bronco could be pulling because your alignment may be off. Only a certified mechanic can reset your alignment.


Where is the OBD II connector on Scion Xd?

The OBD II connector on a Scion xD is located beneath the dashboard, near the driver's side. Specifically, you'll find it to the left of the steering wheel, near the area where the dashboard meets the center console. It may be necessary to remove a small cover or panel to access the connector.


I got new you joints and wheel bearings on my jeep cherokee-why does my front end still shake and pull to the left?

The shaking might be due to wheel imbalance and the pulling due to poor wheel alignment.


When am turning left or right start driving off the front of the car and steering wheel starts shaking?

I dont know but i once hade a similar problem and it turned out the car needed a wheel alignment


Why your 2001 accent steering wheel will not unlock?

you have to shake the steering wheel left to right while also shaking the key towards run and off. eventually it will unlock. if it doesn't work you need to have your keys cut and bought from dealer. the keys to this car only work when bought from dealer.


Where is the fuse box located on a 2008 Scion xD?

The fuse box in a 2008 Scion xD is located under the dashboard on the driver's side. You can find it by looking to the left of the steering wheel, near the brake pedal. There is a cover that needs to be removed to access the fuses inside. Additionally, there is another fuse box located in the engine compartment for larger fuses.


Is shaking someones hand with your left hand correct?

no