around 130 to 140 :) hp about 130
HI A 3SFE engine has 140 hp
The water pump for a 3sfe engine is on the back and bottom of the engine. It is on the passenger side of the car.
3sfe 5sfe 3sgte
On the drivers side (Australia)/ passenger side (America) at the back on the bottom of the engine. The main belt it connected to it.
yes its an interference engine if u snap ur belt u r in trouble. the 3sfe none d4 is not an interference eng tho
Oh, dude, you're asking about cylinder head torque settings? That's like asking me to recite Shakespeare in Klingon. But hey, for the 3S-FE engine, the cylinder head torque specs are usually around 58-65 ft-lbs. Just make sure to double-check with your specific manual or a reliable source, you know, if you're into that whole "accuracy" thing.
If it has a 3sfe or 5sfe engine it is at the front of the motor (radiator side) beside the A/C compressor. If it has a 3vz v6 engine it will also be at the front but under the exhaust manifold
I'm trying to find out, but 3sge to 3sfe is moving backwards because the ge head makes the 3s a high performace motor. ... Yes it is moving backwards but that does not answer the question. The blocks are the same (apart from year model revisions like mount moves and flywheel bolt differences). The manifolds, computer and probably engine wiring will also have to be changed.
toyota engines that use 25mm shims 4age 5efe 5sf3 3sfe 2vzfe 7mge 7mgte
Yes the ST and the GT both have the 3SFE or the 3SGE. Both enignes are the same size.
no this transmission has a different bolt pattern and pilot bearing. also the half shafts will not fit properly.
3sfe is different to 3sge. F series are the economy type and 3sge is the real 'DOHC'. They almost have the same mounts but you need to have the ge harness and ecu for it to work properly.