answersLogoWhite

0

You cannot directly use an R-134a compressor as a replacement for an R-22 system. The two refrigerants operate at different pressures, and R-134a compressors are designed for the properties of R-134a, which could lead to inefficiency or damage if used with R-22. If you need to switch refrigerants, it's advisable to replace the entire system or ensure that all components are compatible with the new refrigerant.

User Avatar

AnswerBot

2w ago

What else can I help you with?

Related Questions

How do you remove the air compressor from a 1999 Grand Am?

Always use safety glasses and gloves! To remove the A/C compressor you must evacuate system & properly dispose of old R-134A. Then unbolt and remove old compressor. (You should be certified to handle R-134A to charge system)


Can you use 134 freon on 1990 Camry?

Not without converting the system to R-134a and replacing the compressor oil.


How do you recharge r134a ac system 1997 Cadillac Eldorado if compressor won't start due system empty?

Jump the compressor relay next to the fuse panel under the hood. Pull the relay out and use a piece of wire to jump the contacts. Compressor will engage, with the engine running fill with your 134a.


Can you use R-134A in compressor that uses R401a?

No, you should not use R-134A in a compressor designed for R-401A. These two refrigerants have different chemical properties and operating pressures, which can lead to inefficiencies, potential damage to the compressor, and safety hazards. It’s essential to use the refrigerant specified by the manufacturer for optimal performance and reliability.


What year air compressor can you use on a 1991 Nissan maxima?

you can use a 1989 thru 1992 ac compressor in 1993 they went to 134a freon so they ar different.


What causes the air conditioner to stay hot in a Lincoln Town Car?

The most common reason would be that you are low of R-134a. The best way to determine this is to use a gauge and get the PSI reading. (This should be done when the compressor is running and the clutch is engaged). Most auto parts stores are willing to help you get a reading. If you are indeed low of R-134a you need to fill your system to the correct PSI level. (This is determined by the current ambient temperature) If the compressor is not running you could fill the system with one can of R-134a, the compressor should start short cycling. If it doesn't do not put anymore R-134a in and seek professional help.


What oil is employed with most of the HFC-134a refrigeration applications?

Most HFC-134a refrigeration applications use polyalkylene glycol (PAG) oils or polyolester (POE) oils as the lubricant. These oils are compatible with HFC-134a and provide good lubrication properties, ensuring efficient operation of the refrigeration system. Additionally, they help maintain system performance and longevity by minimizing wear and tear on compressor components.


Can you use r-134a instead of r-22 Refrigerant?

10 years ago they kept telling us that replacing R12 a/c system with 134 gas was not recommended because will destroy the compressor and so on, I have retrofitted all my vehicles to 134A with no negative consequences ,so I believe it can be done Just have to evacuate the system totally and remove the oil from the condenser,evaporator and receiver dryer(Filter) and add the recommended oil for 134A gas .


Where do r 134a go on your sunbuban?

R-134a refrigerant in a Chevrolet Suburban is typically added to the air conditioning system. You can find the service ports for R-134a on the A/C system, usually located near the compressor. It's important to use the correct port—low-pressure and high-pressure—when adding refrigerant to ensure proper functioning. Always refer to the vehicle's service manual for specific instructions and safety precautions.


Is it ok to use an lra higher or lower than indicated on the compressor?

It is not recommended to use an LRA (Locked Rotor Amperage) higher than what is indicated on the compressor because it can damage the compressor and the electrical system. Using a lower LRA may not provide enough starting current for the compressor to function properly. It is best to follow the manufacturer's guidelines for LRA when selecting a replacement compressor.


Does a 91 Ford Tempo use 134a refrigerant?

Yes, a 1991 Ford Tempo uses R-134a refrigerant. This refrigerant became the standard for many vehicles in the early 1990s as a replacement for the older R-12 refrigerant, which was phased out due to environmental concerns. If you're servicing the vehicle's air conditioning system, ensure that it is compatible with R-134a.


How do you add freon to soda vending machine?

you must first plug in the machine and listen for the compressor to run if it runs you can then put in 134 A. All softdrink companies and machine manufactures use 134A, it can be bought any where and is cheap. You do not have to have a license to buy or use 134A.