answersLogoWhite

0

A entire gammit of reasons , A safety shutdown may be present . A failed electrical control .A failed mechanical component as well . In any combination or individually ( there is not any one set answer, I'm afraid ) . You need a technician to proprly troubleshoot it for you .

Tom H . HVAC proffesional, New Orleans

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How can I troubleshoot a gas heater thermostat that is not functioning properly?

To troubleshoot a gas heater thermostat that is not functioning properly, first check if the thermostat is set to the correct temperature. Next, ensure that the thermostat is receiving power and that the gas supply is turned on. If these steps do not resolve the issue, consider replacing the thermostat or contacting a professional for further assistance.


Can't fit thermostat in housing 02 Nissan altima do you have to force rubber seal down?

No it should fit into the housing along with the thermostat. Try putting the rubber in first, then the thermostat. remember the rubber is malliable so it will conform to the opening, then insert the thermostat


Does the thermostat need replaced on a 1999 Ford Escort ZX2?

I have a 2000 zx2 and it has a thermostat, if that is your question. Having said that, my heater quit working and it turned out to be the cable came loose under the dash on the left side of the radio. At first I thought it was the thermostat but was wrong. Duct taped the cable in place and the control and heater started working fine again.


How do you replace a thermostat on a 1985 Oldsmobile Cutlass Supreme?

First, remove the thermostat housing. Then grab the thermostat by hand and remove it.


How do you replace the thermostat on a 1994 Plymouth acclaim?

To replace the thermostat on a 1994 Plymouth Acclaim, first ensure the engine is cool and disconnect the negative battery cable. Drain the coolant from the radiator, then locate the thermostat housing, which is typically at the engine end of the upper radiator hose. Remove the bolts from the housing, take out the old thermostat, clean the mating surfaces, and install the new thermostat along with a new gasket. Reassemble the housing, refill the cooling system with coolant, and reconnect the battery.


How do you install a thermostat in a Chevrolet aveo 2006?

You will first need to take out the old thermostat. After ensuring that you have the right product, insert the new thermostat.


What is Malik Ayaz famous for?

Malik Ayaz was the first Muslim governor of Lahore. He built and repopulated the city. Along with that, he turned the city into a cultural and academic center.


Does thermostat go in nose first or spring first?

Spring first into the engine.


Why is my central air unit not turning on?

There could be several reasons why your central air unit is not turning on. It could be due to a tripped circuit breaker, a faulty thermostat, a clogged air filter, or a malfunctioning capacitor. It is recommended to check these components first before seeking professional help.


Where is the thermostat at on a 95 jetta?

the hose that is not connected to the water pump there is a part that is called the goose neck that is covering the thermostat you must remove that first to change the thermostat


When replacing an old thermostat on a central air unit for home do you need to turn the electric off?

It is recommended to turn off the power to the central air unit before replacing the thermostat to avoid any electrical shocks or short circuits. This can be done at the circuit breaker or by switching off the power to the unit directly.


How do you change a thermostat on a 300zx?

When changing the thermostat on a Nissan 300zx first drain the coolant from the engine. Then find the lower coolant hose on the radiator. Trace the hose to the thermostat housing. Remove the housing to uncover the thermostat and replace the unit with a new thermostat.