answersLogoWhite

0

The torque settings for the crankshaft and piston on a 3Y engine typically require specific values to ensure proper assembly and function. Generally, the crankshaft main bearing bolts should be torqued to around 50-55 Nm (Newton meters), while the connecting rod bolts usually require a torque of about 40-45 Nm. It's important to follow the manufacturer's specifications and sequence for tightening to avoid any damage. Always consult the service manual for the most accurate and detailed information specific to your engine.

User Avatar

AnswerBot

3mo ago

What else can I help you with?

Related Questions

Tok settings for piston?

Tik settings for crank


Why does a diesel engine produce more torque than a petrol engine?

The cylinder pressures when the fuel fires are higher, up to twice the pressure in a petrol engine, meaning the piston is pushed down with more force and turns the crank with more torque. The piston stroke of a diesel engine is longer, so there is more leverage on the crankshaft, thus it turns the crank with greater torque, but usually at lower RPM'S.


What is Crank torque settings on c190 desil?

The crank torque settings for a C190 diesel engine typically range from 100 to 120 Nm (Newton-meters), depending on the specific engine model and manufacturer guidelines. It's crucial to consult the engine's service manual for the exact specifications and any recommended tightening sequences to ensure proper installation and prevent damage. Proper torque ensures optimal performance and durability of the engine components.


What are the torque sittings for the crank cases on a Yamaha banshee?

Torque settings for yamaha banshee


What are the cylinder head torque settings for a Mazda bongo 2.5 turbo diesel 1997?

what are the torque for camshaft and cylinder head bolts please


What is the energy of torque?

Static torque is basically an applied force, but applied about a centre instead of in a straight line. Dynamic torque, such as that produced by an engine, is a force translated from a straight line (piston) to a circular path (crank) and since its a force at a velocity, its rated as power.


Why does long stroke 4-cycle engine have better torque?

Torque begins as the piston is thrust down the bore on the power stroke. Stroke is the distance the crankpin is offset from the crankshaft centerline X2. The further the crankpin is from the crank centerline the more mechanical leverage granted to the piston. It is a simple lever really and acts as a torque multiplier hence greater net "twist" at the output


What causes engine blow by?

Blow by is caused when combustion gases get past the piston into the crank case. The cause will be piston, rings, or cylinder wall.


Why is the torque converter rotating with the engine?

It's attached to the flywheel that is attached to the crank.


What does stroke means in a car engine?

It's how far the piston travels from its top position to its bottom position as the crank turns. Long stroke is usually good for high torque and short stroke is good for high revs.


Head bolts torque settings?

hi i am looking for the torque settings for a proton gen 2 cylinder head bolt and crank shaft bolts both big ends and main bearing bolts


What is the torque settings for crankshaft pulley on a Honda Accord 2.3L engine?

which direction does a crank shaft pully bolt screw out on a 2002 honda accord lx 2.3l eng. clockwise or counterclockwise?