answersLogoWhite

0

If you are asking is it a common problem the answer is no it is not.

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

If bubbles in a 1992 Stanza radiator mean blown head gasket what is the torque on the head bolts?

22 up to 73 ft.lbs. in 6 (SIX) steps.


How do you replace the thermostat on a 2002 Cavalier 22 Ecotec?

To replace the thermostat on a 2002 Cavalier 22 Ecotec, drain the radiator and remove the upper hose assembly. Replace the thermostat and refill the radiator.


How much stock horsepower does a 2002 Cavalier 22 Ecotec have?

Standard 2.2 engine has 115 h.p. There is an optional 2.2 with 140 h.p.


What are the torque bolt specifications when changing a head gasket on a 1995 22 Chevy Beretta?

14 ft lbs per bold but tighten in a zig zag pattern or you will crack the aluminum.


How many blown saves for blue jays?

As of May 31st 2010 the bluejays have won 31 games and lost 22


What is the torque sequence for a 2001 BMW x5 3.0 head gasket?

The torque sequence for a 2001 BMW X5 3.0 head gasket involves tightening the cylinder head bolts in a specific pattern to ensure even pressure. First, tighten all bolts to 30 Nm (22 lb-ft) in a crisscross pattern. Then, proceed to an additional 90-degree turn followed by another 90-degree turn, maintaining the same pattern. Always refer to the specific service manual for any updates or precise specifications.


What is the torque sequence for a 1998 Saturn sl2 head gasket?

rear left 8 4 1 5 9 front left to right 7 3 2 6 10 22 lbs at first then 37 lbs


How many blown saves has bobby jenks have in his career?

newtest3 i think about 40Actually, according to MLB stats; http://www.mlb.com/team/player.jsp?player_id=408057 he has 22 blown saves


What pitcher has the most Blown saves in 2009?

Brad Lidge 8 blown saves so far 22-30, unbelievable since he went 41-41 last year


What is the torque sequence on a 1998 Mitsubishi mirage head gasket?

For a 1998 Mitsubishi Mirage, the torque sequence for the head gasket typically follows a specific pattern to ensure even pressure. Start by tightening the head bolts in the sequence recommended by the manufacturer, which usually involves tightening from the center outwards in a crisscross pattern. The initial torque is usually set between 22-25 ft-lbs, followed by a final pass at around 44-48 ft-lbs. Always refer to the vehicle's service manual for the exact specifications and sequence for your specific engine variant.


When did Head Case end?

Head Case ended on 2009-05-22.


What is 22 times 1?

Oh, dude, you're hitting me with the tough math questions, huh? Well, brace yourself for this mind-blowing calculation... 22 times 1 is, wait for it... 22! Like, I know, right? Mind officially blown.