answersLogoWhite

0

Counterclockwise.

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

What is the rotation for a ford V8 4.6 engine?

The ford 4.6 v8 engine rotates in a clockwise direction looking at the front. This should be the same for most Ford engines.


What is the rotation for a Distributor cap wiring for a 1966 Ford Fairlane 289 V8?

counterclockwise


Distributor cap wiring rotation for a 1966 Ford Fairlane 289 V8?

counterclockwise


Where is the coil supposed to be placed on a 71 v8 ford truck?

on my 1971 ford 302 motor the coil sits right on the intake and held down by a clamp made just for the coil. if your distributer is located directy in front of the motor, the coil should lay about 3 inches back and to the left of the distributer and will be mounted directly under the air filter.


What do the points set on inside the distributer on a ford 302 1972 pickup truck?

The point gap is .017 inch / point dwell 26 - 30 / ignition timing 6 degrees BTDC / spark plug gap .035 inch / firing order 1 - 5 - 4 - 2 - 6 - 3 - 7 - 8 / distributor rotation COUNTERCLOCKWISE / according to motorcraft . com for a 1972 Ford truck with a 302 cubic inch V8 engine


What is firing order 1970 ford 302?

The firing order for a 1970 Ford 302 V8 engine is: 1-5-4-2-6-3-7-8 The distributor rotation is counter clockwise.


What is the Firing Order for a 1949 Ford V8?

What is the firing order on a 1949 Ford V8?


What is the engine layout on a ford v8 as fitted to the mg 4.6 v8?

need more info. Which ford V8 are you referring too.


Is a ford 302 engine a v8 or v6?

V8


What is the firing order for a 1978 ford bronco?

13726548, dist. rotation is counter clockwise, #1 is R/F ( if it is the 5.8 liter / 351 cubic inch V8 engine )


Ford 4.8 motor?

Ford has a 4.6 liter V8 engine ( GM has a 4.8 liter V8 )


How do you set the timing on a 1984 Ford F250 460 V8?

NEED A TIMING LIGHT LOOK AT THE CRANK FOR TIMING MARK LOOK FOR TIMING MARKS ON TIMING HOUSING FIND OUT TIMING SPECS CHECK MARKS WITH LIGHT IF ADJUSTMENT IS NECESSARY LOOSEN BRACKET BOLT ON LOWER PART OF DISTRIBUTER AND ADVANCE OR RETARD TIMING BY TWISTING DISTRIBUTER RECHECK TIMING AND RE-TIGHTEN BOLT