The air conditioning (A/C) compressor can impact the idling of a car engine by adding extra load to the engine when it is engaged. This additional load can cause the engine to idle lower than normal, potentially leading to rough idling or stalling if the engine struggles to maintain the required RPMs. Conversely, when the A/C is turned off, the engine can idle more smoothly and efficiently, as it no longer has to compensate for the compressor's demand. Proper engine management systems typically adjust idle speed to accommodate the compressor's load, helping to maintain stable idling.
because the compressor isn't getting enough tourque
The 2004 Toyota Tacoma air conditioner compressor can be found on top of the engine. The air conditioner compressor will be on the left-hand side of the engine, near the front.
The large opening of the compressor sucks in air to be compressed and burnt in the engine.
The large opening of the compressor sucks in air to be compressed and burnt in the engine.
The large opening of the compressor sucks in air to be compressed and burnt in the engine.
The 1998 Buick Riviera air conditioner compressor is located in the engine compartment. The air conditioner compressor will be on the left-hand side of the engine.
Northern tools. I thInk you want an engine to power a air compressor?
It compresses the air in a engine or compressor.
It compresses the air in a engine or compressor.
The major function of the turbine in the turbojet is that it supplies the power to turn the compressor. An automatic fuel control unit on a turbojet engine is influenced by the burner pressure.
The compressor may be seized. If you hear the belt squealing or see smoke with hot air blowing out of the vents then the compressor has seized. However if you see none of this then the most likely cause is a defective Idle Air Control (IAC) motor. This will prevent the engine from not idling high enough to prevent stalling.
Yes, a vehicle air compressor is typically belt-driven. It is usually connected to the engine's crankshaft via a belt, allowing the compressor to operate as the engine runs. This design helps ensure that the air compressor receives the necessary power to function effectively while the vehicle is in operation.