Find out what you pay per kWh, then determine the wattage used per hour of run time of the heat pump. Then multiply the two for cost of runtime per hour. Do the same with your cost per therm (100 cubic feet of natural gas). Determine the input rate of the furnace in btu per hour (100,000 btu input would equal 1 therm used per hour of runtime). Multiply the two and you have your cost per hour of runtime.
For example: at $ 1.00 per therm cost and an input rate of 80,000 btu or .8 therms, you would have a cost of $.80 per hour of runtime with natural gas. With a cost of 11 cents per kWh and a system that uses 15 amps, 15 amps x 230 volts = 3450 watts or 3.45kW, multiply that times .11 cents and your cost per hour of runtime is .38 cents. Lastly don`t forget to add in the wattage per hour of the electric strip heater you will need to go with the heat pump. Don`t worry about the power consumption of the indoor fan because you will need that to operate either one. Regardless of how the cost works out for you, I personally would not entertain using a heat pump in your climate.
The cost comparison between an electric furnace and a gas furnace typically shows that gas furnaces are more cost-effective in the long run due to lower operating costs. Gas furnaces have lower monthly utility bills compared to electric furnaces, which can result in significant savings over time. However, the initial cost of purchasing and installing a gas furnace is usually higher than that of an electric furnace.
In central Illinois it runs around $99
Electric furnaces can be cost effective in regions where electricity prices are low. However, they are generally more expensive to operate compared to gas furnaces in regions with higher electricity costs. It's important to consider upfront costs, operating costs, and efficiency when determining the overall cost-effectiveness of an electric furnace for your specific situation.
At the dealer I work at in central Illinois, we charge $14.00 for a four tire rotation.
The cost of a heat exchanger for a furnace can vary depending on the size and type of furnace, but typically ranges from 300 to 1500.
The cost to replace a furnace heat exchanger typically ranges from 500 to 2,000, depending on the type of furnace and the complexity of the installation.
The typical cost of replacing a furnace heat exchanger can range from 500 to 2,000, depending on the type of furnace and the complexity of the installation.
Wood is fairly expensive. It can be if you can cut your own wood though.
The average cost of furnace heat exchanger replacement is typically between 500 to 2,000, depending on the type of furnace and the complexity of the job.
The best cost efficient furnace would be an Energy Star furnace. They are efficient in operation and provide an estimated 21% savings as opposed to other furnaces.
The average monthly cost of operating an electric furnace is typically around 100 to 200, depending on factors such as the size of the furnace, energy efficiency, and local electricity rates.
This is a tricky question. Some homes may not have a gas line. Some cities may not allow gas furnaces and thus only electric is possible. Check with a local heating specialist for information.