take the main hoes that's is connected to the radiator and the engine and then release the two bults remobe the old thermostat remember how you took it out so you know how to put it back then put heat resistance silicone in the o ring then screw the two bult to the engine and put the hose back in to place
take the main hoes that's is connected to the radiator and the engine and then release the two bults remobe the old thermostat remember how you took it out so you know how to put it back then put heat resistance silicone in the o ring then screw the two bult to the engine and put the hose back in to place
take the main hoes that's is connected to the radiator and the engine and then release the two bults remobe the old thermostat remember how you took it out so you know how to put it back then put heat resistance silicone in the o ring then screw the two bult to the engine and put the hose back in to place
Where is the thermostat on a 1997 chevy suburban and how do you change it?
how do u change thermostat in a 1997 kia sportage
how do you change a thermostat for a 1997 Ford Contour
To change the thermostat on a 1996 Cadillac Eldorado, first, ensure the engine is cool and disconnect the negative battery cable. Drain the coolant from the radiator, then remove the upper radiator hose from the thermostat housing. Unbolt the thermostat housing, take out the old thermostat, and replace it with a new one, ensuring the gasket is in place. Reassemble by reversing the steps, refill the coolant, and check for leaks.
You have to drop the subframe
Eldorado College ended in 1997.
yes $100 from snap on
Remove the 2 bolts at the thermostat housing. The upper hose goes to the thermostat housing.
Replace your thermostat.
hard to get at. It is under the intake manifold, facing the eng, to the left near the firewall
Changing a thermostat in a 1997 Plymouth Voyager is very easy to do. You will need to follow the radiator hose to the thermostat. You will then take the hose off the thermostat and remove the two bolts holding the thermostat in place. Make sure to clean the area before putting the new thermostat in place.
Thermostat is on the back of the cyl head up at the bulkhead, follow top rad hose back and you will find thermostat housing.