ignition on for 15 mins remove key reinsert ignition on light should go out hope this helps
it varies from model to model, but from my time working for nissan, they were generally 32psi front 30psi rear
What year and model micra is it? They are all different. Current "bug" k12 model? Previous "bubble" k11 model? or Older "box" k10 model?
No, the 1999 model is equipped with ODB I
The only time you should have to worry about it is if you have problems. Nissan repair says approx. every 100,000 miles
buy a different model Nissan sucks!!!!!
To disable the alarm on a Nissan Micra and leave a pet in the car, you can usually do this by using the key fob. Lock the car with the key fob while ensuring that the alarm system is in "valet mode," which prevents the alarm from triggering. If your model has a specific valet switch, you can also activate it to disable the alarm temporarily. Always ensure that the environment is safe for your pet before leaving them in the car.
In a Nissan Micra, the washer bottle is typically located in the engine bay, towards the back near the driver's side. It is usually a translucent plastic container with a cap marked with a windshield wiper symbol. To access it, you may need to open the hood and look for the bottle that has a spout for filling the windshield washer fluid. Always refer to the owner's manual for the exact location and maintenance instructions specific to your model year.
The Nissan Micra typically uses a timing chain rather than a timing belt, especially in more recent models. Timing chains generally require less maintenance and have a longer lifespan than timing belts. However, it's always advisable to check the specific engine model and year, as variations may exist.
Add brake oil
The cost of a bumper for a Nissan Micra can vary significantly based on factors such as the model year, whether it’s an original equipment manufacturer (OEM) part or an aftermarket option, and the specific retailer. On average, prices can range from approximately $100 to $500. Additionally, labor costs for installation should also be considered if you’re not planning to do it yourself. For the most accurate pricing, it's best to check with local dealerships or auto parts suppliers.
where to add the light of cheak engine
For a Nissan Micra, the torque settings for the cylinder head bolts typically range from 20 to 25 Nm (15 to 18 lb-ft) for the initial stage, followed by a further angle tightening of about 90 degrees for the final stage. However, it's crucial to refer to the specific service manual for the exact model year, as specifications can vary. Additionally, always ensure to use a proper torque sequence to ensure even pressure across the cylinder head.