To remove the throttle body on a 1998 Toyota T100 for cleaning, first, disconnect the negative battery terminal to ensure safety. Next, remove the air intake duct by loosening the clamps and disconnecting any sensors or hoses attached to it. Then, unbolt the throttle body from the intake manifold, typically involving several screws or bolts, and carefully lift it off. Finally, clean the throttle body with an appropriate cleaner, ensuring all surfaces are free of carbon buildup before reassembling in reverse order.
where is the throttle position sensor on a 1998 Toyota 4runner???? can any one help???
It is on the side of the throttle body should be on the back side.
On a 1998 Toyota 4Runner, the idle screw is typically located on the throttle body. It can be found near the throttle linkage, usually marked with a plastic cap that needs to be removed for adjustment. To access it, you may need to remove any air intake components obstructing the view. Always ensure the engine is cool before making any adjustments.
Throttle position sensor is located at the throttle body. There are only two sensors there. The one facing the firewall is what you are looking for.
To remove the back seat of a 1998 Toyota Corolla, you will need to remove the carpet to expose the bolts for the seat. Then, loosen the bolts by removing the nuts. You can then remove the seat.
remove and reinstall
It has a miss or the fuel is clogged somewhere or the throttle body.
The 1998 Honda Accord 3.0 liter engine does not have throttle cable. The automobile has throttle linkage. The linkage is connected at each end with a connecting bolt. Remove the connecting bolt to remove the linkage.
You need to remove the wheel, the caliper and the caliper mount. After you do that you can remove the caliper.
Remove the nuts! They are on the lower metal frame the seat
On fuel injection models its more like a flow adjustment in the throttle body. It is usually a larger screw about 1/2 in. in diameter. Just around the throttle body. Not on the throttle moving system at all.
Dirty throttle plate- clean with carb cleaner and/or dirty maf sensor- clean with electrical contact cleaner or bad throttle position sensor-replace