To replace a Jaguar ignition coil, start by disconnecting the negative battery terminal for safety. Next, remove any components obstructing access to the ignition coils, such as the engine cover. Then, disconnect the electrical connector from the faulty coil and remove the retaining bolts. Replace the old coil with a new one, reconnect the electrical connector, and reassemble any parts you removed before reconnecting the battery.
http://www.ehow.com/how_4509339_replace-ignition-coil-pack-ford.html
Ignition what? Switch? Coil?
Replace the ignition coil(s).
Replace it only if it becomes defective.
there is a coil on each plug
pull the two bolts buy new or used ignition coil the replace the ignition coil is on th left side of motor right by the tbi
Replace the ignition coil.
Replace high tension coil wire. Probably time to replace all the spark plug wires.
No, you do not need to remove the distributor to replace the ignition coil on a 1992 Toyota Paseo. The ignition coil is typically mounted separately and can be accessed without disturbing the distributor. Just ensure you disconnect the battery and follow proper procedures to safely replace the coil. Always consult the vehicle's service manual for specific instructions.
you have to replace your spark plug wires there is a coil on each wire for each cylinder.
you have to buy a whole distributor. coil is not sold by itself
buy a new one