If it has R-12 refrigerant it must be converted to R-134. You can get a kit at Wal-Mart or auto parts--comes with instructions
Take it to an expert. You are not qualified nor do you have the equipment to do this.
To add Freon to a 1982 Toyota pickup, locate the low-pressure service port on the air conditioning system. This port is typically found on the larger diameter aluminum line that runs from the compressor to the evaporator. Remove the cap from the port, attach the refrigerant recharge hose, and follow the instructions on the refrigerant can to add Freon. Always ensure the engine is running and the A/C is set to the maximum cool setting while adding Freon.
To add freon to the air conditioner on a 1989 Toyota SR5 Pickup, locate the low-pressure service port, which is typically found on the larger diameter aluminum line running from the compressor to the evaporator. Remove the cap from the service port and connect the refrigerant can's hose to it. Make sure the engine is running and the AC is set to the maximum setting while you add freon. Always check the manufacturer's specifications for the correct type and amount of refrigerant.
When you are going to add Freon to a Toyota Camry, you need to know which type to add. You will need to put the Freon recharging coupler to the recharging kit, and get the engine to operating temperature. When the engine is at operating temperature put the air conditioning on the lowest setting and recharge the Freon with the windows of the car rolled down.
The amount of refrigerant, such as Freon, needed for a Toyota pickup typically ranges from 2 to 3 pounds, depending on the specific model and year. It's essential to consult the owner's manual or the service manual for the exact specifications for your vehicle. Additionally, it's recommended to have the recharging process done by a professional to ensure proper levels and avoid potential damage to the AC system.
It uses R-12. But if you need to add freon you might have to retro fit the a/c unit by changing it to R-134a wich is a replacement for R-12.It takes about a can 1/2.
Add it to the low presser side. It will be located on the evaporator on the fire wall on the passenger side of vehicle.
To add freon to a Toyota Echo, first ensure the engine is off and the AC system is turned off. Locate the low-pressure service port, typically found on the larger refrigerant line, and remove the cap. Attach a refrigerant can with a hose to the port, and follow the instructions on the can to add freon, ensuring not to overfill. After adding, check for proper cooling and inspect for any leaks.
where do you add freon to a 1998 Toyota Avalon. Where is it located ? thats actually something u have to take to a repair shop to do. make sure the repair shop services the ac for ur car. depending where you go it can be a bit costly depending on the size of each of them.
You add automatic transmission fluid to a 1989 V6 3.0 Toyota pickup truck through the filler tube in the engine compartment. This is also used to check the fluid level.
Yes.
You don't. If it needs refrigrant, it has a leak. Take this to a professional. You have neither the tools nor the expertise to repair.