First, you will want to be sure that it isn't flooding. Be sure that the automatic choke is working properly. Set the timing to factory specifications. Then you can only adjust the idle fuel air mixture. If it continues to run rich then the carburetor is most likely the fault.
The 1987 Toyota Camry does not have a carburetor. It is fuel injected.
With the engine running, turn the idle screw until you get the speed you want.
How do you adjust carburetor 300 honda fourtrax?
Yes, if indeed it has a carburetor. Vehicles with carburetors have were phased out during the 1980's. The year, make, model and engine info would help.
well simply take the car to a mechanic and get it repaired form him, you greddy slimy bstrds
How do you adjust a cub 154 lo boy carburetor
To adjust a Suzuki DT100 that is running rich, first locate the carburetor and find the air-fuel mixture screw, usually situated near the bottom of the carburetor. Turn the screw clockwise to lean the mixture, making small adjustments and testing the engine's performance after each change. Additionally, check the spark plug for fouling; if it’s sooty, it indicates a rich condition. Ensure that the air filter is clean, as a clogged filter can also contribute to running rich.
If the carburetor has an adjustment screw for the lean/richness you can adjust it there. If the air cleaner is dirty or clogged replacing it might take care of the problem. If not, you will probably have to rebuild the carburetor.
You can adjust your VW carburetor by using the adjustment screws. There is an adjustment screw to adjust the flow of fuel. There is an adjustment screw to adjust the flow of air.
To adjust the carburetor on a Yamaha Timberwolf, first ensure the engine is warm and running. Locate the idle adjustment screw, usually found on the side of the carburetor, and turn it clockwise to increase the idle speed or counterclockwise to decrease it. For fine-tuning, you may also adjust the air-fuel mixture screw, typically located near the bottom of the carburetor, to achieve the best performance. Always make small adjustments and test the engine's response after each change.
by turning the screws on the side of the carburetor
No