Put the key in and set it to either ACCESSORY (I) or ON (II) position.
Wait for the navigation system to boot up and press the "Menu" button on the center console.
Press the joystick to the right twice to go to Settings screen 2.
The fourth option down on Settings screen 2 is "Clock Adjustment".
To set the clock on a 2007 Honda Jazz, start by turning the ignition switch to the "On" position without starting the engine. Press and hold the "Clock" button until the display begins to blink. Use the "H" and "M" buttons to adjust the hours and minutes, respectively. Once the correct time is displayed, press the "Clock" button again to set it.
Hold AM button on radio. After 5 secs. Clock will blink and then use the disc plus and minus to adjust hour and seek + or - for minutes.
To set the clock on a 2007 Honda Pilot with a navigation system, turn on the vehicle and press the "Menu" button on the navigation screen. Select "Settings," then navigate to "Clock." From there, you can adjust the time by using the touch screen or the corresponding buttons, ensuring you save the changes before exiting the menu.
To set the clock on a 2007 Honda Fit, first turn on the ignition or accessory mode. Press and hold the "Clock" button until the display begins to blink. Use the "H" (hour) and "M" (minute) buttons to adjust the time, then press the "Clock" button again to save the settings. Make sure to set the correct AM or PM as needed.
You consult the Owners Manual
Push & hold the sound (clock) button until it beeps. Then adjust time with the number 3 or 4 buttons. When time is correct, escape with pushing the sound button one time.
Turn off the radio and press the clock button. Use the adj dial to adjust the hour, press the clock button again to adjust minutes.
Hit clock symbol button then adjust using the right tuning knob. Thanks, Wes
go into settings on the LCD/navigation screen . you will see "time"
best take it back to a local Honda dealer, the engineers can modify the sensitivity
In your owners manual, there should be a radio code & how to enter it.
To change the time on a 2007 Acura RDX clock, first, turn on the vehicle and locate the clock display on the dashboard. Press and hold the "Clock" button until the display starts to flash, then use the "H" (hour) and "M" (minute) buttons to adjust the time. Once the correct time is set, press the "Clock" button again to confirm and exit the setting mode.