0
To adjust the valves on a 17 hp Briggs & Stratton Intek engine, first, ensure the engine is cool and disconnect the spark plug. Remove the valve cover to access the valves. Use a feeler gauge to measure the valve clearance; the intake valve should typically be set to 0.004-0.006 inches, while the exhaust valve is usually set to 0.006-0.008 inches. Adjust the clearance by loosening the lock nut and turning the adjusting screw until the correct clearance is achieved, then re-tighten the lock nut and replace the valve cover.
What else can I help you with?
How do you adjust valves 21 hp Briggs stratton intek v twin?
Valves 21 hp Briggs and Stratton Intek V Twin can be adjusted by increasing the torque on screw band with a right rotation. This can eliminate some leaking problems.
How do you adjust valves on 16 hp Briggs stratton intek single cylinder motor?
Even though an Intek is not shown, it would be the YouTube video below.
Scotts Briggs and stratton intek 6.5?
scotts intek 6.5 starter cord replace
What oil goes in to a intek 6.5 Briggs and stratton?
SAE 30
What is the spark plug gap for a Briggs and stratton Intek 20 HP?
0.030
Fram oil filter for a craftsman ys4500?
For a Briggs & Stratton Intek engine "PH8170"
What is the spark plug gap for Briggs and stratton 21 hp intek v-twin?
0.030"
How do you repair carb on 18 hp intek Briggs and stratton?
Try this site: http://outdoorpowerinfo.com/repairs/
What is the compression reading for a Briggs and Stratton intek v twin?
It needs at least 70 psi to run.
How much oil in Briggs and stratton 18.5 hp intek engine?
48 oz oil capacity
What is the spark plug gap for Briggs and stratton 5 hp engine?
try .030 unless it is an Intek OHV and then 0.020"
What is the hp of a Briggs and stratton 8.5tp intek?
In many product descriptions I'm seeing 8.5tp engines as replacements for 5.5hp engines.
