how do i bleed brakes on a 2003 hyunia xg350
always use 5x30
http://www.innerbean.com/housecor/bleed_brakes.html
quoted $300 for front brake pads, figure I can do no own for less
same way you bleed the brakes. push clutch all the way to the floor and release the bleed valve on the transmission. tighten it up, release the clutch. Need 2 people to do it.
dot 3 or 4. bleed the brakes and fill with the same type
BRAAAAAAKKKKKKKKKKKKKKKKESSSSSSSSSSSSSSSSSSSSSSSSSSSSSS!!!!!!!
To bleed the brakes on a 2003 Hyundai Accent, start by ensuring the vehicle is securely elevated and supported. Begin at the wheel farthest from the master cylinder (usually the rear passenger side), using a brake bleeder wrench to open the bleeder valve. Have an assistant pump the brake pedal several times and hold it down, then open the valve to release fluid and air until a steady stream flows out, then close the valve before the assistant releases the pedal. Repeat this process on the remaining wheels in the order of farthest to closest to the master cylinder, ensuring to keep the brake fluid reservoir topped up throughout.
Not really an answer, but another question... did you bleed the brakes after you changed them? I remember that is a critical step, NOT to be missed when working on the brakes. Hope this helps.
2003 hyundai accent diagram
The 2003 Hyundai Elantra has 16 valves.
The 2003 Hyundai Sonata has 16 valves.
The 2003 Hyundai Accent has 16 valves.