Check your brake lights and see if they are working. Ford has it so if your brake lights are out you can not shift out of park.
Worn e-brake linings or e-brake linings and cables are out of adjustment.
should be a release lever next to the e- brake padel
The most likely culprit for a do-nothing parking brake is a misadjusted cable. Generally there is an nut that can be used for adjustment at the rear of the vehicle that will allow you to tighten or loosen the parking brake cable.
An e-brake cable is probably frozen up. Replacement is your best option.
Downshift, apply e-brake and look for the safest path to avoid injury. Most parking brakes these days are just that, "parking brake" so don't expect much when you apply them.
Downshift, apply e-brake and look for the safest path to avoid injury. Most parking brakes these days are just that, "parking brake" so don't expect much when you apply them.
The parking brake interlock on video players in cars is an important safety feature and should not be disabled.
Because the e brake is hooked into your braking system and that system has a problem.
Its very simple to bypass the parking brake on Kenwoods. All the parking brake wire is is a ground wire. So, all you need to do is take the parking brake wire and either ground it or join it to the ground wire on the harness by soldering or whatever you wanna do.
There is either a leak still evident in the system or air in the system or the E-brake is on slightly.
How do you change the front brake pads on a Ford E-250 van? cannot remove the pads from assembly.