0
Before removing the belt either draw the belt's path or note the sticker showing the belt's path. Put the correct size socket on the center bolt of the idler tension pulley - pull the tensioner pulley up to loosen the belt - slip the belt off. Install in reverse order. The spring in the tensioner pulley is pretty stout, you might need someone to help you slip the belt back on.
What else can I help you with?
What is the difference between a C2500 and a K2500 Chevy truck?
The C2500 is 2wd and k2500 is 4wd.
What is the oil capacity of a 2000 Chevy K2500?
Oil and filter change - 7 quarts. 6.6 quarts with a 454
What are the wires going into ac pump 1995 chevy k2500?
The wires going into the AC pump 1995 Chevy K2500 are the red-marked wires.
Where is the ignition control module on your 1990 Chevy k2500 pickup?
it's underneath the rotor in the distributor. you have to take the distributor out to change it.
Do 1989 Chevy k2500 scottsdale have air bags?
No
What is the horsepower does a 99 k2500 Chevy truck have?
The rated horsepower of a 1999 K2500 Chevy truck is 255. The base engine is a V-8 that is 5.7 cubic liters.
What is the Firing order for 1997 Chevy k2500 4wd?
18436572
What is the gross weight of 1988 Chevy silverado k2500 with the 5.0l engine?
The gross weight of a 1988 Chevy Silverado K2500 with a 5.01 engine is about 2.5 tons. This is equal to about 5,000 pounds.
Heater core removal Chevy truck?
Need to know what year and model the truck is. 1992 Chevy k2500
Where is the oxygen sensor for 1989 Chevy k2500?
Check the manifold, just before the headpipe.
Where is the oil pump on a 6.0 Chevy k2500?
Its on the front of the crankshaft in front of the timing chain.
How do you get to the heater core in a 2000 Chevy k2500?
Disassemble the dash, open up the HVAC compartment.
