It will vary by vehicle and this can't be answered specifically without the make, model and year of the vehicle. The general headlight bulb lamp replacement procedure: Purchase the correct replacement headlight bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information and full light bulb part numbers list. Then consult your owner's manual for the headlight bulb lamp replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
changeing side light bulb
Left or right hand side?
uncase, unscrew old bulb, screw in new bulb, put case back on
To change a front side light bulb in a 2000 Opel Vectra, first, open the hood and locate the back of the headlight assembly. Twist the bulb holder counterclockwise to remove it, then pull out the old bulb. Insert the new bulb without touching the glass, reattach the bulb holder by twisting it clockwise, and test the light to ensure it works before closing the hood.
hi how do you change aside light bulb on a skoda octavia
To change the front side light bulb on a Ford Fiesta MK6, first, open the hood and locate the headlight assembly. Remove the protective cover or cap at the back of the headlight to access the bulb. Disconnect the wiring harness from the bulb, then twist the bulb socket counterclockwise to release it. Replace the old bulb with a new one, reconnect the wiring, and secure the cover back in place.
shogun side light bulb
you have to remove the head-light assembly to get the turn signal bulb front and rear lights The side light has one screw on top to the outside of the headlight assembly holding the cover in place.
you push in front of lens into bumper, and than slide lens into bumper and it will pop out, then change bulb by pulling socket out.
On my 2002 Nissan Xterra I had to remove 4 screws from the front bumper and wheel well and then I was able to get to the back side of the side marker light and remove the nut in order to get to the light bulb. i don't need to change just the bulb. The entire light assembly must be replaced. The reflector is broken. i cannot get wires to release.
easiest way is to partially remove the inner wing which will expose all the side bulbs.
To change the front side light bulb on a Land Rover Discovery 3, first, open the hood and locate the back of the headlight assembly. Remove the plastic cover or cap holding the bulb in place, then carefully twist and pull out the old bulb. Insert the new bulb, ensuring it’s securely in place, and replace the cover. Finally, test the new bulb to ensure it’s functioning correctly.