answersLogoWhite

0

Hub needs to come off (two ball joints, steering arm, brake pipe and breather hoses).

Clamp in a vice and take out the seal from the inside of the hub (centre of brake pads). Remove the circlip, then place face down on the floor and use a suitably sized socket and mallet to knock out the bearing.

Installation is the same procedure in reverse. Remember to put back the circlip, and the split pins (cotter pins) back into the crown nuts for the steering arm, the ball joints and your hub nuts.

Bleed brakes, and you're done. A few hours work if your quad is in reasonable nick, and you have the parts to hand.

It's a good opportunity to replace brake pads and ball joints while you've got the hubs off.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

Change front wheel bearings on Honda ATV?

how do you change front wheel bearing for 420 rancher


How do you remove the front axle on 1998 Honda 450 foreman?

How do you remove the front axle on 1998 Honda 450 foreman?Read more: How_do_you_remove_the_front_axle_on_1998_Honda_450_foreman


How do you remove the front driveshaft on a 1995 Honda foreman?

remove the four bolts at the front and the rear


Is the wheel bearings on Honda rancher the same on front and back?

No, the wheel bearings on a Honda Rancher are typically not the same for the front and back. The front and rear wheel bearings are designed differently to accommodate the specific load and design requirements of each axle. It's essential to check the specifications for your particular model and year to ensure you obtain the correct bearings for replacement.


Do the front wheel bearings on a 1991 Honda Accord have to be pressed out?

yes they do. I have a 1991 Honda civic and I needed to press them in and I believe they have the same front end.


What size tires are on the Honda Foreman TRX450 ES?

25X8X12 on front, 25X10X12 on rear


Where is the VIN on 2003 Honda Foreman s 450?

Look on the front crossmember at the center and you will find it.


How do you change the front wheel bearings on a 1996 Honda Magna 750?

you would be better off to just get a new wheel because it would save you time and trouble.


How do you change oil on a 1995 Honda foreman 400 four wheeler?

it is simple, it is right below the head of of the atv. On a polaris scrambler it is right in front of the left rear fender


Where is the VIN on 2005 Honda Foreman s 500?

The vin is located on the front cross member directly front center of the machine.


Where is the VIN on a 2002 Honda Foreman Rubicon?

Check the front of the frame just behind the front skidplate. The VIN number should be there.


Where is the VIN location on a Honda foreman?

Inside the front left tire. you have to cut ompen the tire to see it.